Ask Experts Questions for FREE Help !
Ask
    gawrinauth7's Avatar
    gawrinauth7 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 9, 2008, 10:38 AM
    Goodman furnace
    This is a new furnace, it worked about 25 minute in all and when I turned it on the system and the pilot comes on but when its time for the gas to fire the furnace there is no gas, coming and then the pilot goes off, when I tried again the same thing happen, the furnace tries to come on but it seems there is no gas and the pilot turn off again .
    Please advise,
    Prakash
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Oct 9, 2008, 11:15 PM
    Have the professional who installed the new furnace recheck his work and service the burner and controls to find the problem. The installer should warranty his work and the new furnace.
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
    		  
    #3

    Oct 10, 2008, 07:36 PM

    Sounds like the gas hasn`t been turned on
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Goodman furnace GMNT080-4 furnace runs good for a while then has to be manually reset [ 5 Answers ]

I have a Goodman GMNT080-4 (90%). I'm having the same problem As Streatherg did back in the Nov 2006 question. I reviewed his article and tried Every thing on there but seems to be doing the same thing. The furnace kicks on for about an hour then locks out and has to be manually reset threw...

Goodman Furnace-again [ 5 Answers ]

I have a Goodman GMP150-5 with A/C the upper fan comes on, the glow plug lights and ignites the gas jets but the big fan on the bottom won't start up, and therfore the gas jets go out. The basement flooded overnight but not enough to reach the circuit board even though the wiring got wet somehow. ...

Goodman gas furnace [ 3 Answers ]

I have a problem with the heat. I replaced the circuit board & pressure switch. It still flashes 3 times saying pressure switch. Heat does not come on

Goodman furnace [ 1 Answers ]

I would like more info about Goodman furnaces. I just had a man look at my old furnace and give me a bid of $1,450.00 to take out the old one and install a Goodman 80% and bring the old piping up to code. Thanks... jorjee

Goodman Gas Furnace [ 1 Answers ]

Up until yesterday my furnace was working fine now it does not come on at all. I have turned off the power to it and the breaker and still nothing. I also have tried turning on the air and that does not come on either. I don't know the model number but I have been using it for about 4 years now.

View more questions Search