Ask Experts Questions for FREE Help !
Ask
    Bert2's Avatar
    Bert2 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Feb 6, 2008, 06:28 AM
    Goodman Furnace-again
    I have a Goodman GMP150-5 with A/C the upper fan comes on, the glow plug lights and ignites the gas jets but the big fan on the bottom won't start up, and therfore the gas jets go out. The basement flooded overnight but not enough to reach the circuit board even though the wiring got wet somehow. The 3 amp fuse is OK so is there something on the circuit board that can be replaced can the board be replaced or should I be looking at something else?
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Feb 6, 2008, 07:32 AM
    If you had water you better call for professional service. Way to many things to look at and check for safe operation.
    Bert2's Avatar
    Bert2 Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Feb 6, 2008, 10:14 AM
    I called a professional as you advised. Serviceman found a faulty switch behind the door panel. Probably got wet. Since the unit had two switches on the circuit he bypassed the bad one and the system is running fine. Thank you for your quick response.
    OmahaJoe's Avatar
    OmahaJoe Posts: 17, Reputation: 2
    New Member
    		  
    #4

    Feb 13, 2008, 12:34 AM
    Goodman furnaces are the worst. Usually the guys that install them are fly by night people with many BBB complaints like Park and Sons or Emergency Heating and Repair in Omaha Nebraska. If you are reading this and have a Goodman Furnace big, rip it up and get another bid from a reputable dealer. Goodman does not select dealers, many won't carry them. They are not worth it. The lower initial cost will soon be erased by having to have repairmen over to look at it and fix it. Spend the extra money on better stuff. I will replace my Goodman within three years even if it is still working.
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #5

    Feb 13, 2008, 01:04 AM
    Quote Originally Posted by OmahaJoe
    Goodman furnaces are the worst. Usually the guys that install them are fly by night people with many BBB complaints like Park and Sons or Emergency Heating and Repair in Omaha Nebraska. If you are reading this and have a Goodman Furnace big, rip it up and get another bid from a reputable dealer. Goodman does not select dealers, many won;t carry them. They are not worth it. The lower initial cost will soon be erased by having to have repairmen over to look at it and fix it. Spend the extra money on better stuff. I will replace my Goodman within three years even if it is still working.

    ((The probem in Goodman won't use dealers, they sell their crap to anyone))


    The factory has a policy and they DO NOT sell to anyone.
    The factory only sells to wholesale houses for the HVAC trade.
    It is the wholesale house or the dealer that is selling to anyone.

    Goodman is just as good as any other equipment if installed correctly.
    The problem is many units are not installed correctly because Joe homeowner bought on off Ebay and installed it himself causing all the problems.
    mrc44's Avatar
    mrc44 Posts: 3, Reputation: 1
    New Member
    		  
    #6

    Feb 16, 2008, 08:41 PM
    Blower comes on before furnace ignites,
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Goodman furnace GMNT080-4 furnace runs good for a while then has to be manually reset [ 5 Answers ]

I have a Goodman GMNT080-4 (90%). I'm having the same problem As Streatherg did back in the Nov 2006 question. I reviewed his article and tried Every thing on there but seems to be doing the same thing. The furnace kicks on for about an hour then locks out and has to be manually reset threw...

Goodman Furnace [ 4 Answers ]

I have a two year old high efficiency Goodman furnace that seems to have problems from time to time. The strange thing is that my son-in-law had his furnace installed about the same time and he has the same problem. We have our thermostat programmed for 62 during the night and at 6:00 am it goes...

Goodman furnace [ 5 Answers ]

The furnace comes on and the furnace ignites. It then burns for a few seconds and goes off without the fan coming on. I have changed the flame sensor. Didn't help. Also the fan will come on by itself without the furnace coming on. Help!!

Goodman Furnace did come on [ 1 Answers ]

I got a Goodman GMH950904cx furnace. I installed it about a month ago, and it worked fine when I turned it on. Recently, the weather chilled and I tried to turn on the furnace everything worked except there is no gas coming up. The motor runs, and ignitor light up but no GAS. The gas tank is...

Goodman furnace [ 17 Answers ]

I have a goodman furnace. Forced air. No a/c. I turn the power on and she starts. Thermostat is off. No wires are crossed that are visible. The pilot does not ignite but the heating element is on. No gas seems to be coming through. Any suggestions? The furnace is only a year and a half old.

View more questions Search