Ask Experts Questions for FREE Help !
Ask
    pastrings's Avatar
    pastrings Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 8, 2008, 01:50 PM
    Dv6000 laptop won't start
    I've had my pavilion dv6000 for over a year and today, Windows xp won't start up... I start the computer and then get a blank screen after the HP logo goes away... no clue what to do.
    seahwk83's Avatar
    seahwk83 Posts: 3,276, Reputation: 212
    Ultra Member
    		  
    #2

    Sep 8, 2008, 05:58 PM
    See if you can get into safe mode and run system restore to an earlir date when this was not happening

    Boot into safe mode by "tapping" the F8 key when computer is starting, you should come up to a option boot menu, choose safe mode -


    Go down to the part of the link that says, Use System Restore
    Windows XP System Restore Is Easy to Use
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

PACKARD BELL laptop just won't start/ boot [ 4 Answers ]

Hi all, thanks for looking, Problem... I have a packard bell easy note laptop that refuses to boot/start at all. I was having problems anyway so I did a recovery/ formatt where it wiped off all software and restored it back to factory settings.via the start menu( can't remember which button!)...

Saturn won't start, power locks won't work, radio resets itself. [ 4 Answers ]

My 99 Saturn has had some starting problems in the past. It would sometimes not start but if you let it sit from anywhere from 45 minutes to 24 hours, it would eventually start. Or, after having Dad look at it, we could tap the starter and it would work. So we thought it was the starter. I...

HP Pavilion dv6000 [ 1 Answers ]

I did't realize my computer didn't come with a restore disk! Well once I realized I needed to make one my computer crashed! Does anyone know how I can maybe download a new restore disk? I have a HP Pavilion dv6000 it had windows Vista on it. I bought it in Feb 2008! Thank you so much for reading...

Kenmore he4 panel won't work and dryer won't start [ 1 Answers ]

I have had the circuit board/panel replaced once on my he4. I had only 2 weeks left on the warranty and figured it should be OK once it was fixed. They wanted another $200 to renew the warranty! Didn't have the $$ at the time. Anyway, the same darn thing is happening... you have to push the buttons...

View more questions Search