Ask Experts Questions for FREE Help !
Ask
    Soleil's Avatar
    Soleil Posts: 3, Reputation: 1
    New Member
     
    #1

    Sep 6, 2008, 11:02 AM
    Using the proper gage wire fro long distance outside run
    Hi,
    1) I am looking to run a 460' wire to an 5-wheel trailer - which I understand needs a 30 amp circuit. For the AC particularly, and need to figure out what is the proper gage wire to use.:confused:
    2) Also, I am told that I can not run romex wires in a conduit outside, is that true?:mad:

    3) And, alternatively, if I decide not to run a 30 amp capable wires, and only plan on running lights, etc (less costly and low usage expected) along with a gate motor for the end of the driveway what gauge wire would I need?

    I think that if I buy 50 foot rolls I will not only save money but have NO connections but a harder pull. I have 1 1/4" conduit.

    4) Oh, can I run an intercom wire in the same conduit? :confused: Some have said it would be OK some say it's a no no. I guess I can run this sort of wire (irrigation wire) on top of the pipe.

    I appreciate your time!:D
    Soleil
    stanfortyman's Avatar
    stanfortyman Posts: 5,598, Reputation: 279
    Electrical & Lighting Expert
     
    #2

    Sep 6, 2008, 11:13 AM
    1) Since this is a 120v circuit voltage drop is a real concern. For this circuit and a 24 amp continuous load you would need #1cu conductors.

    2) Absolutely NOT. You can run UF cable, but that is very bad practice and for what you are running the cable would be HUGE. You conduit would not support it.

    3) Why bother? If you going to do it do it right and do it once.
    The gate is another whole story. What does the gate require? How much does it draw? Is there a control box at the house or is it self contained? We only know it is a gate, nothing else... :confused:

    4) Absolutely NOT. Run another conduit if the trench is open. In fact, run TWO more.
    Soleil's Avatar
    Soleil Posts: 3, Reputation: 1
    New Member
     
    #3

    Sep 6, 2008, 11:26 AM
    Quote Originally Posted by stanfortyman
    1) Since this is a 120v circuit voltage drop is a real concern. For this circuit and a 24 amp continuous load you would need #1cu conductors.
    :( #1cu, I have been told that #8 and another said I would need #6 - and the price keep going up! What am I to do? I think that I amputting lots $$ for little use. what do you think of these other guages?

    2) Absolutely NOT. You can run UF cable, but that is very bad practice and for what you are running the cable would be HUGE. You conduit would not support it.
    :rolleyes: That's good

    3) Why bother? If you going to do it do it right and do it once.
    The gate is another whole story. What does the gate require? How much does it draw? Is there a control box at the house or is it self contained? We only know it is a gate, nothing else...... :confused:

    4) Absolutely NOT. Run another conduit if the trench is open. In fact, run TWO more.
    :o Well if I run approved buriable wire (I think one calls it UH wire) - such that can be used for intercom and controller for the gate from the house, (can I use irrigation 5 wire or something like that?:confused: )
    stanfortyman's Avatar
    stanfortyman Posts: 5,598, Reputation: 279
    Electrical & Lighting Expert
     
    #4

    Sep 6, 2008, 11:49 AM
    Quote Originally Posted by Soleil
    what do you think of these other guages?
    I think they are way too small.


    Quote Originally Posted by Soleil
    :o Well if I run approved buriable wire (I think one calls it UH wire) - such that can be used for intercom and controller for the gate from the house, (can I use irrigation 5 wire or something like that?:confused: )
    Once again, knowing nothing about the gate I cannot comment with any certainty.

    All I can say is that is a long way. Even more chance for something to happen to the wire. Unless your soil is pure sand I would run conduit.
    If you do run direct bury cable I would have the gate company suggest what to run.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Proper wire sizing? [ 3 Answers ]

We are re-routing the supply line to our pump house, where there is an extension panel with 30A 220V (pump controller) and 15A & 20A 110V breakers. It's about a 60' run from the 200A main service in the house, being placed in conduit 2' underground. The wire in place is newer 10 gauge solid copper....

Proper wire gage [ 1 Answers ]

Currently my sub panel in the garage is supplied by 10 gage 2 wire with ground from a 30 amp dbl pull breaker in the house. The run is 30' to the 100 amp box in the garage. The garage is a part time workshop with several power tools on at the same time along with 10 4' fluorescent light fixtures...

12 Gage wire 110 outlet [ 1 Answers ]

What amp breaker should I use for a out side 110 outlet using 12 gage wire.Used for plugging in vacuum cleaner to clean cars.

12 gage wire on a 15 amp switch [ 1 Answers ]

If you can use 15 amp receptacles and switches on a 20 amp circuit, then why won't they accept (quick connect) 12 gage wiring?

Long distance subpanel wire size [ 7 Answers ]

I have a horse barn that is 1014 feet of 1.5" conduit away from the main house panel. The main panel is 400 amp 240/120 volt and I have left 100 amps for use in the barn. My current electrical needs in the barn are 2 - 1/2hp motors, one for a gate and one for a hot walker, and a small fridge that...


View more questions Search