Ask Experts Questions for FREE Help !
Ask
    TopperHarley's Avatar
    TopperHarley Posts: 3, Reputation: 1
    New Member
     
    #1

    Jul 20, 2008, 02:30 PM
    How Do I tell What Size My Intertherm gas furnace is?
    The Model #mgh-065-abwn-06. If anyone can be of any assistance please help! Its HOT in here! Thank you. Any Questions feel free to ask.
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
     
    #2

    Jul 20, 2008, 03:29 PM
    65,000 BTU input.

    Is this in a mobile home?
    TopperHarley's Avatar
    TopperHarley Posts: 3, Reputation: 1
    New Member
     
    #3

    Jul 20, 2008, 03:40 PM
    Quote Originally Posted by hvac1000
    65,000 BTU input.

    Is this in a mobile home?
    Yes it is. More recently named "the Hot Box"
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
     
    #4

    Jul 20, 2008, 03:44 PM
    That is the size you have. I have the same one in my trailer at camp. Good old furnaces but not real efficient as gar as gas consumption is concerned.
    TopperHarley's Avatar
    TopperHarley Posts: 3, Reputation: 1
    New Member
     
    #5

    Jul 20, 2008, 03:48 PM
    Quote Originally Posted by hvac1000
    That is the size you have. I have the same one in my trailer at camp. Good old furnaces but not real efficient as gar as gas consumption is concerned.
    Great! Thanks A lot! One more question though, What size outside unit should I have to be equal to that. I got a 3 1/2 ton out there now that I can't keep running and people are telling me that I can have a bigger inside unit but not a bigger outside unit.
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
     
    #6

    Jul 20, 2008, 04:27 PM
    The unit you have now is just about the biggest you can put in there. The home duct system is very high static and you will never be able to move enough air no matter what blower you put in.

    My unit is 16X 65 and 2 tons will turn it into a meat locker. It is possible your unit is not running as best as it could. 3 and a half should run away with it.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

My intertherm furnace pilot lights but furnace won't kick on [ 5 Answers ]

I need some diagnostic help. We have a full propane tank. A new burner plate (last year) and the blower works. We light the pilot but the knob should pop up after one minute thus lighting the furnace. It won't pop up. What part should we replace? The furnace is a 17 year old Intertherm MGH...

Intertherm furnace [ 1 Answers ]

I have a mobile home with a intertherm heating and air unit. My furnace will not come on in auto but you can set it on ventilate and it will blow. What is the problem?

Intertherm Furnace [ 2 Answers ]

I have an Intertherm Furnace model MGHA-077ABFC-05. The pilot continuously goes out on it. Is there another filter or something other than what is on the furnace door ?

Intertherm furnace [ 1 Answers ]

I own a 1985 modular home and the intertherm blower fan on my furnace quit working is it too hard to fix or change?:confused: Also what is the cost to fix it?:eek: Please help!! :) Thank you Rachell

Intertherm Furnace [ 1 Answers ]

My pilot light comes on and ignites heat exchanger but when the cover closes the flames shut down. The blower works but heat exchanger will not stay lit. I have replaced the gas valve and the thermo couple. Suggested that damper valve needed to be adjusted - where is the damper valve


View more questions Search