 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Intertherm Furnace
My pilot light comes on and ignites heat exchanger but when the cover closes the flames shut down. The blower works but heat exchanger will not stay lit. I have replaced the gas valve and the thermo couple. Suggested that damper valve needed to be adjusted - where is the damper valve
|
||||
|
||||
|
Is this in a Mobile home?
What cover are you talking about? Are you talking about the sight port used for lighting the pilot? Did you check the main oriface for pluging? Is there snow or ice on the roof blocking the combustion air? Mobile home furnaces use a roof jack that takes out the burnt gas but also supply combustion air to the furnace. |
||||
Not your question?
Ask your question
View similar questions
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
My intertherm furnace pilot lights but furnace won't kick on
[ 5 Answers ]
I need some diagnostic help. We have a full propane tank. A new burner plate (last year) and the blower works. We light the pilot but the knob should pop up after one minute thus lighting the furnace. It won't pop up. What part should we replace? The furnace is a 17 year old Intertherm MGH...
Blower on Intertherm Furnace
[ 6 Answers ]
This is an older furnace.It works fine sometimes! I raised the tstat and nothing happened, I pushed the fan switch from auto to on and it worked-back to auto and it didn't work. When I checked the breakers and flipped them off and back on the blower started.Any idea where the problem may be? ...
Intertherm 53,000btu electric furnace
[ 1 Answers ]
The heating element turns on, and off in a few seconds, but the blower doesn't take off. Any suggestions would be appreciated.
View more questions Search
|
