Ask Experts Questions for FREE Help !
Ask
    AzWhtMtns's Avatar
    AzWhtMtns Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 7, 2007, 10:32 PM
    Intertherm Furnace
    I have an Intertherm Furnace model MGHA-077ABFC-05. The pilot continuously goes out on it. Is there another filter or something other than what is on the furnace door ?
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
    		  
    #2

    Oct 8, 2007, 04:46 PM
    If it goes out after every lighting,, I would look at replacing the thermocouple ,this keeps the pilot burning at all times,, most don`t have but one filter
    hvac-r rookie's Avatar
    hvac-r rookie Posts: 4, Reputation: 1
    New Member
    		  
    #3

    Oct 8, 2007, 06:30 PM
    I say, have the heat xchanger checked and make sure the co detector is working properly
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

My intertherm furnace pilot lights but furnace won't kick on [ 5 Answers ]

I need some diagnostic help. We have a full propane tank. A new burner plate (last year) and the blower works. We light the pilot but the knob should pop up after one minute thus lighting the furnace. It won't pop up. What part should we replace? The furnace is a 17 year old Intertherm MGH...

Intertherm furnace [ 2 Answers ]

I have just in the last month had an Intertherm furnace installed, and since installation they have had to come in twice because they claim the starter button is not firing. They replaced it and now it is on the fritz again. It starts for about 8 seconds and cuts out. There is fuel in the tank....

Intertherm furnace [ 1 Answers ]

I own a 1985 modular home and the intertherm blower fan on my furnace quit working is it too hard to fix or change?:confused: Also what is the cost to fix it?:eek: Please help!! :) Thank you Rachell

Intertherm Furnace [ 1 Answers ]

My pilot light comes on and ignites heat exchanger but when the cover closes the flames shut down. The blower works but heat exchanger will not stay lit. I have replaced the gas valve and the thermo couple. Suggested that damper valve needed to be adjusted - where is the damper valve

View more questions Search