Ask Experts Questions for FREE Help !
Ask
    waltzink's Avatar
    waltzink Posts: 1, Reputation: 1
    New Member
     
    #1

    Jun 9, 2008, 08:13 PM
    CB trips, seeing a spark when trying to reset
    Hey all. I am having an odd issue.

    I woke up today to no power in my bedroom, and the roommate had nothing outside of his TV working. The other roommate has 2 outlets that work. I have temporarily set up some stuff on an extension cord to just get online, etc. (will be pulled tomorrow).

    Now, when I checked the fuse box, 2 of the breakers had tripped. One I switched back on, no problem. The other one? Nothing doing. I have left it off for a bit and re-tried, but still nothing. The apartment complex's maintenance guy came over, and I guess simply switched it on, and when I came home, I had power. For about an hour and a half.

    Now, when I try to switch it on, I see that it will spark up. I am a bit fearful to try again. This is after I bought a new CB and replaced it, too. So it's something internal, I suppose? Or should there be a higher # CB in there?

    Right now I have: Murray / Crouse Hinds Breaker MP115

    Would I need something with more power to avoid what is happening?
    donf's Avatar
    donf Posts: 5,679, Reputation: 582
    Printers & Electronics Expert
     
    #2

    Jun 10, 2008, 12:43 PM
    No, you need to have your maintenance man tell you how much amperage is fed to your apartment.

    Then you say to the fellow, get an electrician out here because I have seen the panel sparking.

    Only qualified electricians are allowed to work on apartment homes and condos main panel systems.
    stanfortyman's Avatar
    stanfortyman Posts: 5,598, Reputation: 279
    Electrical & Lighting Expert
     
    #3

    Jun 10, 2008, 01:45 PM
    I agree! You should NOT be MESSING with this!!

    Call the LL, NOT the maintenance guy, and get a REAL electrician over to see where the short circuit is.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Briggs 14.5 hp ohv - No spark to spark plug [ 1 Answers ]

Was mowing tall grass when it died. At first there was a small spark at the plug but now there is none. Had been having to use pickup to jump start the Huskee 38" riding mower. Where can I find a schematic for this engine. Model 287707 Type 1224-E1 Code 000531ZD

12.5 briggs and s that lost spark magnito replaced and no spark [ 3 Answers ]

I have a Deutz-Allis 613 lawn tractor with a B/S 12.5 horizontal engine. When I got it. The engine would run fine unless it was under a load... if the choke was pulled out half way the engine wouldn't stall. I replaced the drive belt and then the mower belt sharpened the blades and the tractor...

Oil burnerr reset trips occasionally [ 1 Answers ]

My oil burner control safety trips and cuts off the furnace about once a month. Resetting it by pushing the red button easily restarts the burner. There is a wisp of smoke expelled around the flame viewing cover plate so I assume that some oil was left in the combustion chamber from the previous...

Reset button keeps needing to be reset [ 2 Answers ]

The reset button on our oil furnace needs to be reset every 10 to 14 days. What can be the problem? We are leaving for the holidays and I'm concerned that we could come home to frozen pipes.

Don't get spark from my spark plug wire [ 1 Answers ]

I get spark from my spark plug wire sometimes when I don't the jeep don't start Why I don't get spark sometimes?


View more questions Search