Ask Experts Questions for FREE Help !
Ask
    waterboy1996's Avatar
    waterboy1996 Posts: 1, Reputation: 1
    New Member
     
    #1

    May 11, 2008, 08:12 PM
    Hunter Grand Lodge ceiling fan turning backwards
    I have a Grand Lodge Hunter fan. It has a remote control and no pull chains.
    When I first turn the switch on, the light comes on. So far so good. Then
    I turn the fan on with the remote. It starts turning backwards. I have
    Reverse button so I can press it and get it turn the right way. However,
    I'd like to have the fan turn the right way from the beginning. Any
    Ideas?
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
     
    #2

    May 11, 2008, 09:17 PM
    Leave the wall switch on and control the fan from the remote. Many fans reset when you turn the wall switch off.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

93 grand am key stopped turning [ 1 Answers ]

Just bought this car it's a 93' grand am and the key just stopped turning. Trying to figure out why??

Hunter Ceiling Fan [ 2 Answers ]

I have a Hunter ceiling fan but I don't know the name of it. It has a remote but no pull chains. The problem is I can control the fan with the remote but the light button the remote has stopped controlling the light on the fan. I can kill the power to fan from the wall. I want the fan to run...

Hunter ceiling fan [ 1 Answers ]

What is the wiring configuration for a new fan switch. I did not notice the order when the old one was removed. It is a four wire combo consisting of Blk, Brwn, Grn and gray

Removing a hunter ceiling fan [ 1 Answers ]

We are trying to remove a hunter ceiling fan.we unscrewed every screw and still can't get it down the only thing that is left is the black motor I guess,it spins and the canopy is left also.there is not screws on the canopy.we have tried everything even hanging from it but nothing seems to...


View more questions Search