 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Originally Posted by mihaf
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
In the process if doing an extensive remodel and I'm upgrading my natural gas plumbing. I've got the sizing all worked out but I'm confused about where sizes should change. My gas meter has a 3/4 inch output. I understand that I can connect my new 1 1/4 inch pipe as long as it is "close" to the...
I live in san francisco and am adding a lavitory sink I plan to connect to current shower drain with a wye and loop vent through same what size pipe do I need and what is the best way to support it ? Sink will be 4 1/2 feet from shower drain thank you tallgrass:o
I wish to install a hydronic kick plate heater but it only has 1/2" inlet & outlets the zone has 3/4"pipe should I put in a bypass around the heater to keep the flow the same?
I have a 1982 double wide cavco that sits above ground. I had a slow drainage problem in the tub and shower. I called the plumber out, actually three of them worked on the issue, and was not resolved. The supervisor explained that after trying for four hours, they were going to call it quits. He...
Hi,everyone, I am confused about the pipe size for a urinal. The specification for one brand flushometer says that: 1" IPS angle stop and 1 1/4" top spud I don't know where the top spud is. If my water supply line pipe size is 1 1/4" IPS, should i find a flushometer with 1 1/4" angle stop or 1...
View more questions Search
|
