Ask Experts Questions for FREE Help !
Ask
    jmp2204's Avatar
    jmp2204 Posts: 15, Reputation: 1
    New Member
    		  
    #1

    Apr 26, 2008, 11:52 AM
    Engine swap 16 hp briggs
    Hello,I am changing a motor on a older ford riding lawn mower,It is a 16 hp twin and I'm putting a newer 16 hp twin on it(both briggs) The newer one has a fuel solenoid and the older doesn't ,I am wondering where do I have to tie in the solenoid too? The newer motor also has a govener the older doesn't ,does it matter? I can supply both engine#'s if someone needs them for reference
    New motor model -303777
    Type -0332-01
    Code -92061611
    (other #) -1880

    Old motor
    Model-402707
    Type -0138-01
    Code- 83120712


    Any help or additional advice would be much appreciated! Thanks
    jmp2204's Avatar
    jmp2204 Posts: 15, Reputation: 1
    New Member
    		  
    #2

    Apr 28, 2008, 06:26 AM
    Anyone?
    MOWERMAN2468's Avatar
    MOWERMAN2468 Posts: 3,214, Reputation: 243
    Ultra Member
    		  
    #3

    Apr 28, 2008, 04:53 PM
    Quote Originally Posted by jmp2204
    anyone?
    Patience is of the virtue. There are a lot of questions to be answered daily or as soon as we can in our "spare" time.

    Now then, the best solution for you is to remove the fuel solenoid and replace it with the bolt from the other carb if it will fit. And see if the engine will run without the fuel solenoid.
    jmp2204's Avatar
    jmp2204 Posts: 15, Reputation: 1
    New Member
    		  
    #4

    Apr 28, 2008, 11:32 PM
    Thanks and sorry(I see it is a very busy froum)
    jmp2204's Avatar
    jmp2204 Posts: 15, Reputation: 1
    New Member
    		  
    #5

    May 1, 2008, 06:17 AM
    No bowl on the other carb,anyone know where I can tie the wire in?
    jmp2204's Avatar
    jmp2204 Posts: 15, Reputation: 1
    New Member
    		  
    #6

    May 5, 2008, 09:01 AM
    Actually in case anyone runs across a similar problem or wants to bypass the solenoid.I drilled the movable plunger out so it does not shut off the fuel.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Engine swap [ 1 Answers ]

I have a 1982 barth motorhome with a 427 chevy gas engine.Can I swap an isuzu diesel into it without changing the tranny?It is a turbo 400.Thank you,Rick

Engine Swap Problems 11 hp Briggs and Stratton [ 6 Answers ]

I blew an engine on my 2001 Murray Mid Engine Ridder. A friend gave me and older model engine and Ii found problems with connecting the wires. On the engine blown there was one yellow wire fron the coil to the wiring harness and one red wire from the strator to the wiring harness. My problem...

My first engine swap 2zz-ge engine [ 6 Answers ]

Here's the deal. I have been debating for a couple months no about trying my hand at an engine swap in my 2005 toyota corolla xrs. After doing some research I understand that this can become a serious undertaking. My main question is what are some of the most common road blocks that can be...

Engine Swap [ 2 Answers ]

I am thinking about swapping out a 7.3 diesel to a V8 gas in my 1991 ford F250 4X4 Extended Cab Pickup. Would it be cheaper to rebuild the diesel or to swap out for a V8 ? If I swap out the diesel what all do I have to do ?

View more questions Search