Ask Experts Questions for FREE Help !
Ask
    zippodude's Avatar
    zippodude Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Apr 20, 2008, 11:26 AM
    Craftsman tractor stalls when brake is released.
    My craftsman tractor starts fine but when I release the brake the engine stalls .It is a 22 hp automatic garden tractor, model 917.273080.
    MOWERMAN2468's Avatar
    MOWERMAN2468 Posts: 3,214, Reputation: 243
    Ultra Member
    		  
    #2

    Apr 20, 2008, 03:07 PM
    Your seat safety switch is probably the problem.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Craftsman mower clutch/brake [ 4 Answers ]

I have a Craftsman lawn tractor and something happened while mowing. Now to get the mower to go forward or reverse I have to pull back on the clutch/brake pedal. Works fine as long as I have it pulled back, but my foot is getting tired holding it in position so the mower will go. Recently...

Sears garden tractor dies when clutch is released [ 5 Answers ]

I have a 25HP 2003 model Sears tractor that dies each time I either release the clutch or turn on the mower PTO. I have replaced the plunger switch under the seat but that didn't solve the problem.

Sears tractor brake bracket [ 1 Answers ]

I have a early 80's sears 11 HP 36" 4 speed tractor that has a broken transaxle bracket that is used engaged by the brake/clutch pedal. it is an "S" shaped bracket that fits on a shaft on the transaxle. Does anyone know where I can find this part? Thanks

Murray Tractor dies when brake is let off! [ 3 Answers ]

I have a 42 inch murray lawn tractor I got from somebody and I was rebuilding it. I took the carb off and cleaned it out, rebuilt it. Its running fine now finally after 4 days of working on it. My problem is I have to have the brake down to start it and I sit on the seat and when I take my foot...

View more questions Search