Ask Experts Questions for FREE Help !
Ask
    bsimms4989's Avatar
    bsimms4989 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Apr 12, 2008, 07:33 AM
    Leak after replacing shower knob
    Basically all I did was unscrew the Delta knob and faceplate and suddenly water is dripping down through two floors in my house. Help! I thought this was a pretty routine thing to do like replacing the shower faucet or head. What happened? Thanks!
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    Apr 12, 2008, 08:25 AM
    Can you see where the water is coming from, possibly the cartridge?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Shower knob [ 1 Answers ]

How do I disassemble a shower knob

Single MIXET knob Bath tub Leak [ 3 Answers ]

I have been searching all over the web for answers and still not able to stop the leak, this is last my last resort before I have to get a plumber, So here it goes. I have a continuous bathtub leak coming from the spout, It is a single Handle, the brand name is MIXET. Instead of replacing...

Replacing Knob and Tube [ 3 Answers ]

I'm looking for a little clarification here. I'm in the process of replacing the Knob and Tube wiring in an older 1930 home. Although I trying to preserve the original look of the house the K&T prevents me from installing insulation in the attic. Originally there was only one circuit running into...

Shower Knob Stuck [ 1 Answers ]

Hello. My hot water shower knob has been stuck for months and the only way I can turn it is buy using channel locks. Though I don't think this has anything to do with it, the knobs themselves used to fall off all the time, and so during a weak moment I epoxied them into place. I know, not a...

Leak from knob under sink [ 4 Answers ]

It appears that the shut off knob , for the hot water is leaking. Drops are forming on the screw. I tried tightening it, but that did not help. :confused: Many thanks.

View more questions Search