Ask Experts Questions for FREE Help !
Ask
    skwarlo's Avatar
    skwarlo Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 26, 2008, 11:46 AM
    Kenmore heavy duty 60 series washer
    I have a kenmore heavy duty 60 series that will not go into full spin. Sounds like something is rubbing and slowing the basket
    Credendovidis's Avatar
    Credendovidis Posts: 1,593, Reputation: 66
    -
    		  
    #2

    Mar 28, 2008, 03:22 AM
    Quote Originally Posted by skwarlo
    I have a kenmore heavy duty 60 series that will not go into full spin. Sounds like something is rubbing and slowing the basket
    Have you checked if something got stuck between the drum and outer wall?
    There is limited access if you remove the rear cover.
    Always disconnect the power lead and put it on the floor before you open the dryer.
    Safety first!
    Success!
    ;)
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Heating Problem - Kenmore Heavy Duty 60 Series Soft Heat [ 4 Answers ]

My Kenmore Heavy Duty 60 Series Soft Heat Model 96565210will not heat on any setting. The dryer runs normally, it just won't heat at all. We did install a new heat element, and that would not heat up. Any help is appreciated!

Kenmore Heavy Duty Dryer 80 series [ 4 Answers ]

Our dryer will not keep running. We have a Sears Kenmore Heavy Duty Dryer - 80 series, electric. When you push the button for it to start tumbling, it will not go. It was running about a week ago, then while in the cycle it stopped. Every now and then the dryer will start when you push in the...

Kenmore Heavy Duty Washer now agitating [ 3 Answers ]

Our Kenmore Washing doesn't seem to be agitating correctly. The base will turn but the agitator doesn't. I pulled it off and put it back on. Just to make sure it was seated correctly. Any thoughts. Thanks Chris

View more questions Search