Ask Experts Questions for FREE Help !
Ask
    csrich's Avatar
    csrich Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jul 17, 2007, 10:52 AM
    Kenmore Heavy Duty Washer now agitating
    Our Kenmore Washing doesn't seem to be agitating correctly. The base will turn but the agitator doesn't. I pulled it off and put it back on. Just to make sure it was seated correctly.
    Any thoughts.

    Thanks
    Chris
    esquire1's Avatar
    esquire1 Posts: 2,483, Reputation: 209
    Ultra Member
    		  
    #2

    Jul 17, 2007, 11:34 AM
    Have you separated it and looked at the dawgs. Sounds like they are broken or wore out. Remove the top, then the softner dispenser,then pry the cap off and you will see a bolt to take out then separate the 2 halfs and you will see them.
    csrich's Avatar
    csrich Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Jul 17, 2007, 11:39 AM
    Now for the stupid question. What is a dawg, besides a nickname for a college football team.
    Chris
    esquire1's Avatar
    esquire1 Posts: 2,483, Reputation: 209
    Ultra Member
    		  
    #4

    Jul 17, 2007, 11:47 AM
    It locks the 2 halfs together. And allows to lock in one direction. Should be 4 dawgs (or ears) I believe you can go to Appliance Parts from RepairClinic.com - HomePage and pull up a diagram of your unit to see. They are not expensive or difficult to do
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore Heavy Duty washer woes [ 5 Answers ]

I have a Kenmore Heavy Duty washer, model C110 4870880. It has started to leak what looks like oil from underneath. There are no corresponding sounds or smells, but for a little while now, the knob sticks at the second rinse point. If I move ithe knob slightly, the machine moves into that cycle,...

Kenmore Heavy Duty Dryer [ 3 Answers ]

The Heating Element is working, the belt is fine and there is power to my dryer but when you push the start button it does not start. Please help... Thanks.

Kenmore Heavy Duty washer water leakage? [ 2 Answers ]

It would be wonderful if anyone can help. I have and old Kenmore heavy duty Washer, Model#c1104430081 canadian model. Problem starts as washer becomes full of water, leakage seems to occur between washer basin(if that's The correct term?) and adjacent metal connector. Leakage increases on...

View more questions Search