Ask Experts Questions for FREE Help !
Ask
    sue wilcox's Avatar
    sue wilcox Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 5, 2008, 01:57 PM
    Harbor breeze ceiling fan
    I am trying to put up a harbor breeze ceiling fan and also bought a remote for this and can't find a place to put the electrical part for the remote. Any suggestions
    WallyHelps's Avatar
    WallyHelps Posts: 1,018, Reputation: 136
    Ultra Member
    		  
    #2

    Mar 5, 2008, 02:37 PM
    You would probably install it in the ceiling canopy that attaches to the ceiling (i.e. where the downrod hooks into. The wires from the fan come up the downrod and through a little ball. Connect your remote control receiver to these wires and also to the power wires coming from the ceiling.

    Turn the electricity off first!
    WallyH
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #3

    Mar 5, 2008, 03:26 PM
    Yes, the remote receiver goes in the ceiling canopy between the mounting and the outlet box.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Harbor Breeze ceiling fan. [ 1 Answers ]

My ceiling fan w/ remote had water spilled on it, the power light flashed for a day then stopped. Now when I use it, I have power to two lights, speed control, but no stop or reverse. Please advise.

Harbor Breeze Ceiling Fan [ 6 Answers ]

Have a Harbor Breeze ceiling fan with remote and the power was shut off from the circuit breaker box and now my fan or light will not come on. Checked the connections, dip for the remote and reset the circuits but no luck. Any one with any ideas please pass along. Thanks

Harbor Breeze Ceiling Fan [ 2 Answers ]

Fan works but light does not. I think it only needs a new bulb but I can't figure out how to change the bulb. Is there a trick to getting the globe off? This is my first house and this seems to be a major struggle... Thanks!:(

Harbor breeze ceiling fan [ 1 Answers ]

I replaced the pull switch for fan motor. In the process of rewiring the new pull switch, the black wire from old switch was not connected, so when I replaced with new switch I connected black wires. The light works but fan doesn't. The switch is a 4-wire pull chain switch.

Harbor Breeze ceiling fan [ 1 Answers ]

I purchased a Harbor Breeze ceiling fan. On the remote on the wall it has an on and off switch AND a on and off button. The switch doesn't seem to do anything. I am also trying to figure out how to change the direction of the fan to no avail. My builder threw away the box and directions. Is there a...

View more questions Search