Ask Experts Questions for FREE Help !
Ask
    jeff garbow's Avatar
    jeff garbow Posts: 1, Reputation: 1
    New Member
     
    #1

    Mar 2, 2008, 09:19 AM
    Thermostat not working
    I have a maple-chase thermostat #09600 (programmable) that will not operate. It was working fine until a spark of static electricity from my finger to the unit caused it to malfunction. I tried pushing the reset button but no luck. I have researched the manual but cannot find anything that helps. I checked the fuse and it is good. Please assist if you can. Thanks.
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
     
    #2

    Mar 2, 2008, 02:42 PM
    It was working fine until a spark of static electricity from my finger to the unit caused it to malfunction.


    Stop touching the thermostat. LOL. Just kidding.

    You might start by checking the 24 volt furnace power circuit. Also check the main power to make sure it is turned on.

    If the circuit board in the furnace has a blown fuse that will also cause this problem.

    Last but not least the thermostat could be defective.

    Your finger should not have had a thing to do with it but strange things do happen.
    T-Top's Avatar
    T-Top Posts: 1,871, Reputation: 100
    Ultra Member
     
    #3

    Mar 2, 2008, 07:26 PM
    I agree with hvac1000 strange thing do happen and we want to point our finger to one thing(the thermostat). He gave you a good starting point.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Is thermostat working properly? [ 3 Answers ]

During the cycling of a furnace, how long should it be off and how long should it run? Thanks,

My furnace or thermostat is not working [ 1 Answers ]

I have a honeywell RTH230B thermostat and my furnace is a carrier. Now the red light at the bottom of the furnace is on all the time when it works but then it will stop working and the red light will blink one short 4 long witch means it's a lockout. Now why does it do that and what do I need to...

Thermostat not working [ 1 Answers ]

My ceiling heat won't shut off when I turn down the thermostat. How do I find out if the thermostat is broken?


View more questions Search