Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Installed thermostat, then A/C unit stopped working
[ 2 Answers ]
We just moved into our new home. Noticed the A/C went on all day, non-stop even though it was set on auto at 77 degrees. Figured the thermostat was broken, so decided to replace old one with Honeywell 5-2. Mapped it just like the 4-wiring old one, Y-G-W-R. Red wire on old thermostat was wired to...
Honeywell programmable thermostat not working
[ 1 Answers ]
Honey programmable thermostat not working on "AUTO" position. Air conditioning will come on with "ON" switch, however, when on "AUTO" thermostat shows all functions in display but I can't adjust temp or change settings at all or get display to go away. The power did go out for a few minutes...
RTH230B Thermostat A/C Relay Not Working
[ 3 Answers ]
I have read several postings on here about this subject, but have not really found the answer to my problem. I am having similar trouble with my relatively new RTH230B Thermostat (Mainly the A/C won't work properly). I installed it this past fall and my gas furnace worked like a charm. However,...
AC not working-Thermostat fuse blown?
[ 3 Answers ]
I was in my basement tonight where my furnace and blower unit is located. I heard a small click and saw a flash of white light out of the corner of my eye. Not knowing what it was I inspected the furnace, water heater, etc. I then noticed that the air did not kick in. I checked my bnew Carrier... View more questions Search
|