Ask Experts Questions for FREE Help !
Ask
    blindcowboy's Avatar
    blindcowboy Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Feb 18, 2008, 01:35 PM
    14hp kohler
    I have a 14hp kohler engine in a 1980 john deere skid steer, I have put on new batteries but they don't stay charged, I replaced the regulator but still doesn't charge, what could I do next thanks John
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
    		  
    #2

    Feb 18, 2008, 09:21 PM
    Do you have a generator or an alternator? If you have a voltage regulator sounds like you may have a generator. If so check brushes in generator.
    MOWERMAN2468's Avatar
    MOWERMAN2468 Posts: 3,214, Reputation: 243
    Ultra Member
    		  
    #3

    Feb 19, 2008, 05:43 PM
    Have you tested the unit for output on the charging system?
    blindcowboy's Avatar
    blindcowboy Posts: 2, Reputation: 1
    New Member
    		  
    #4

    Feb 19, 2008, 05:58 PM
    No I haven't, Should it test between 10 to 12 amps, and is the starter act like a generator, also does the regulator need to be polared, thanks john
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
    		  
    #5

    Feb 19, 2008, 08:11 PM
    Should probably test about 14 volts. (volts, not anps). No, I don't think the starter can double as a generator.
    Have you checked to make sure that you don't have something draining the battery while you sleep?
    the1unv's Avatar
    the1unv Posts: 285, Reputation: 31
    Full Member
    		  
    #6

    Feb 28, 2008, 11:19 PM
    I have a 14 horse kohler in my 310 bobcat. I had a problem like yours. If it sat more than a day it was dead. I had a short between the switch and the starter. Fixed that and it has been great ever since.
    Mike
    PS my generator puts out between 14 - 15 volts when charging.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Compression release 14hp briggs stratton [ 1 Answers ]

How to adjust compression release 14 hp briggs engine ohv,

Agway 14HP Lawn Tractor [ 1 Answers ]

Hi, I was wondering if anyone has any ideas on why our lawn tractor won't go forward or reverse. It just all of a sudden stopped. Everything else seems to be running just fine. We can move the lever to forward/neutral/reverse, but nothing happens. Thanks for any info you can give.

B&s 14hp value [ 1 Answers ]

how do you adjust the value on it it hard to start was told to adjust the value the start and battle was OK please HELP!! 1

14hp briggs and stratten motor [ 3 Answers ]

Has two wires from under flywheel red and black and two other wires going behind the starter (not the starter wires) how do I use these wires to get this motor running?

Murray 14hp riding mower [ 1 Answers ]

Hello, I've been trying to get my riding mower to work. It has a briggs and straton 14hp engine. It sat for the winter, and obviously battery was dead. I replaced it with a new one and it ran great. I let it sit about 3 hours and the battery didn't have enough juice to start it. The lights were not...

View more questions Search