Ask Experts Questions for FREE Help !
Ask
    michellec1121's Avatar
    michellec1121 Posts: 1, Reputation: 1
    New Member
     
    #1

    Feb 2, 2008, 08:35 AM
    Clicking thermostat for heat pump
    We built a new house this past August. In our bedroom they placed a honeywell thermostat for a heat pump that heat the top level of the home. It makes a loud click when it turns on and then another as it seems to turn the one cycle. It is so loud (granted I am a light sleeper) but it wakes me up all night long. I have heard that all heat pump thermostats make a loud click, is it true? How hard would it be to move this thermostat say to the hallway?
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
     
    #2

    Feb 2, 2008, 09:56 AM
    Wouldn`t be that hard, but where-ever you move it its going to operate according to the temperature of that area, just keep in mind,and also needs to be in the area where a return air vent is within 10 feet,, goodluck,, I`ve not heard of any complaints about thermostats being that loud, most make hardly no sound at all.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

NO HEAT! Janitrol heat pump and AC system. Changing to Lux Thermostat. Wiring issue. [ 11 Answers ]

I have a Janitrol A/C and heat pump system. I replaced the thermostat with a Lux T9000LC The A/C works fine, but the heater does not. I have it wired as follows: G - Green Y - Yellow W - White RH - Pink B -

Heat Pump Thermostat [ 1 Answers ]

Thermostat for my heat pump system in my home has died. I think that some heat pumps energize the reversing valve in heat mode and some energize the reversing valve in cooling mode. Question is : "When replacing a thermostat for a heat pump how can you tell which type of system you have and does it...

Heat pump thermostat Aux. Light is going on when no resistance heat used. [ 2 Answers ]

I have a Maple Chase SaverStat thermostat on a Lenox heat pump. The thermostat and heat pump are ten years old. Recently when the heat pump comes on the Aux. light on the thermostat also goes on (not the emergency heat light). I have checked and the auxiliary heat strips and they are not heating...

Heat Pump Clicking Noise [ 8 Answers ]

Recently, my heat pump has started to make a clicking noise when it is turned off. The clicking is about one second apart and is continuous. I thought that it was one time occurrence, but when I checked after a day's time, it was still clicking. The thermostat is switched completely off. ...

Heat Pump Thermostat [ 1 Answers ]

I have a Heat Pump by Unitary Products, Model F2FP036N06B with a White-Rodgers thermostat, Type No. 1F89-11. The 5 amp fuse controlling the thermostat has blown three times in the last 24 hours. After replacing the fuse, everything seems to work normally for a few hours before it blows another...


View more questions Search