Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
NO HEAT! Janitrol heat pump and AC system. Changing to Lux Thermostat. Wiring issue.
[ 11 Answers ]
I have a Janitrol A/C and heat pump system. I replaced the thermostat with a Lux T9000LC The A/C works fine, but the heater does not. I have it wired as follows: G - Green Y - Yellow W - White RH - Pink B -
Heat pump thermostat Aux. Light is going on when no resistance heat used.
[ 2 Answers ]
I have a Maple Chase SaverStat thermostat on a Lenox heat pump. The thermostat and heat pump are ten years old. Recently when the heat pump comes on the Aux. light on the thermostat also goes on (not the emergency heat light). I have checked and the auxiliary heat strips and they are not heating...
Heat pump thermostat wiring
[ 1 Answers ]
I have pored over the thermostat wiring messages on this forum, but I still have a question. I am installing a RiteTemp 8085C to replace a Janitrol thermostat for my Goodman heat pump. The old thermostat was wired as follows: Red to R Orange to O Yellow to Y Green to G Blue to C White...
Heat Pump Thermostat
[ 1 Answers ]
I have a Heat Pump by Unitary Products, Model F2FP036N06B with a White-Rodgers thermostat, Type No. 1F89-11. The 5 amp fuse controlling the thermostat has blown three times in the last 24 hours. After replacing the fuse, everything seems to work normally for a few hours before it blows another... View more questions Search
|