Ask Experts Questions for FREE Help !
Ask
    nuffen's Avatar
    nuffen Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Jan 14, 2008, 11:37 AM
    Gas Drier runs OK but no heat
    Kenmore Elite Gas Drier runs OK but no heat
    donf's Avatar
    donf Posts: 5,679, Reputation: 582
    Printers & Electronics Expert
    		  
    #2

    Jan 14, 2008, 11:44 AM
    If there is no heat to dry the fabrics, just how can the drier be working okay?

    Check that you are actually setting the dryer to heat, not to just aid dry or wrinkle remover.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Gas dryer runs but doesn't heat [ 7 Answers ]

I have a gas dryer that runs but doesn't heat. The Timer progresses but doesn't shut off in Timed dry and the timer does not progress at all on auto dry. Please help

AC fan runs slow, but switch to heat fan runs normal [ 3 Answers ]

The other morning I came into the house and noticed the ac was not working. I turned off the breaker to the unit for a few minutes. Then turned it back on. Went to the thermostat pushed it over to auto and the fan came on but ran very slow. I them turned it off. Then turn on the heat, the fan...

Heat runs with ac and even auto kicks on emg heat [ 1 Answers ]

(Coleman Evcon) Some how the hot and cold on the inside thermostat switched.how is that possible?and how do I fix it?

Outside a/c unit runs when heat is on [ 1 Answers ]

We have Trane XB80 that's three years old. This past fall we installed a Hunter programmable thermostat model number 44360. The wiring on the thermostat was done correctly. We have natural gas heat. Our outside unit runs when we're using the heat. Is this supposed to happen and, if not, what could...

New matag drier won't heat [ 1 Answers ]

OK it works in the store lol. My 4 prong connecter is hot on both red and black my grounds are grounded and I replaced the 4 prong connecter still no heat it turns good jumped both grounds and still no heatchecked back of drier and black is hot red is hot checks hot on both and I am going crazy...

View more questions Search