Ask Experts Questions for FREE Help !
Ask
    djwd's Avatar
    djwd Posts: 1, Reputation: 1
    New Member
     
    #1

    Jan 5, 2008, 09:05 PM
    Sears Garage Door
    I have a Sears garage door opener and it has a RED led on the top used for setting the remote codes. For about two months now that RED led will flash 5 times and then go off for a minute and then flash again 5 more times and continually will do this. Can anyone answer what this code means, I have had this opener for over 5 years and this LED flashing continually just started.
    ordunotegg's Avatar
    ordunotegg Posts: 2, Reputation: 1
    New Member
     
    #2

    Jan 5, 2008, 10:48 PM
    How do I reset my keyless entry code
    esquire1's Avatar
    esquire1 Posts: 2,483, Reputation: 209
    Ultra Member
     
    #3

    Jan 6, 2008, 11:42 AM
    Quote Originally Posted by ordunotegg
    How do I reset my keyless entry code
    Press and release the learn button. This turns the receiver on for 30 seconds. Within this 30 second period, you must enter your new 4 digit PIN into the keypad and hold the enter button for 5 seconds. When the keypad stops blinking, check your new code

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Sears Garage Door Remote [ 3 Answers ]

I am trying to find a supplier for the following: I would like to purchase a remote control unit for my Sears 1/2 hp garage door opener.. 2 of them came with the unit, but now a new member of the family has moved in and I would like for him to have a unit also.. The only information...

Sears garage door opener [ 6 Answers ]

I have a sears garage door opener. When it gets cold, the door will not close unless I hold the wall switch down until it closes to the ground. When the weather gets above 40 degrees, then it works fine. Any idea on what is causing this? I have tried to adjust the opener but it doesn't help.

Sears Kenmore Garage Door Opener programming [ 1 Answers ]

I am having trouble getting a Kenmore garage door opener to program.

Sears garage door opener spring [ 1 Answers ]

I have a garage door opener that I purchased from Sears less than 2 years ago and I took out the extra warranty.. DO the warranty usually cover the breakage of the spring on the door itself? If not is it a easy job one could do himself? Or is something a professional should do? Thanks


View more questions Search