Sears Kenmore Garage Door Opener programming

robingm Posts: 1, Reputation: 1

New Member

Oct 15, 2007, 04:59 AM

Sears Kenmore Garage Door Opener programming

I am having trouble getting a Kenmore garage door opener to program.

icecream Posts: 160, Reputation: 6

Junior Member

Oct 16, 2007, 10:13 AM

Can you explain your problem a little better please.

Add your answer here.

Check out some similar questions!

Antenna length Sears Garage Door Opener [ 8 Answers ]

Hi I have a used Sears 41A3036 opener with very bad remote range. The battery has been changed and only give you an added 5 or so feet of range when fresh. The antenna looks as if it may have been cut or broken off at some point. Its aprox 6" long. Im just wondering if anyone knows how long it...

Overhead Door garage door opener light just blinks? [ 5 Answers ]

:confused: My 15 y/o Overhead Door (brand) garage door opener was working fine opening & closing until a few days ago. It has very low usage because I mostly park my car outside the garage door. Now when I press the remote control w/ new battery OR the hard wired wall switch, the light on the...

Garage door opener prevents door from opening all the way -- how to fix? [ 1 Answers ]

My wife and I moved into a house three months ago and we didn't realize this problem before we bought it. I'm trying to solve a problem with an existing garage door and Genie opener which due to the amount of backroom along the tracks, doesn't allow me to open the garage door the full length...

Garage Door Opener Kenmore 1/2 Hp locking up [ 1 Answers ]

When closing my garage door opener, it will start to close and then go back up. Sometimes as much as 3 times before getting it to close. Is this a sensor problem or what? Should I just replace the opener for $175 or is is less expensive to let the repair guy some at $65 a visit plus parts and...

Sears garage door opener spring [ 1 Answers ]

I have a garage door opener that I purchased from Sears less than 2 years ago and I took out the extra warranty.. DO the warranty usually cover the breakage of the spring on the door itself? If not is it a easy job one could do himself? Or is something a professional should do? Thanks