Ask Experts Questions for FREE Help !
Ask
    VA John's Avatar
    VA John Posts: 5, Reputation: 1
    New Member
    		  
    #1

    Dec 16, 2007, 09:32 AM
    Whirlpool Icemaker not getting water
    I've read a few other posts on this subject, and have done a few checks...

    Model ED22TEXHW03
    \Getting water from supply line OK, and the water in door feature works
    \Solenoid is dual type, but has separate connections. Had fridge plugged in (is this wrong?), removed electric connectors and checked voltage in (.5 each side) and resistance (169 OHMS water to icemaker side and 338 OHMS water to door side).

    So, do I need a new solenoid? Do I need to check something else?

    Thanks
    proEVERYTHING's Avatar
    proEVERYTHING Posts: 5, Reputation: 0
    New Member
    		  
    #2

    Nov 10, 2008, 03:45 PM
    You should not use a dual type. Most likely there is a defect. You should also retrace your steps and check the voltage. Things like that require preciseness!
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Whirlpool Refridg Icemaker not working [ 2 Answers ]

Hi, I have a whirlpool with icemaker and water dispenser in the door. The icemaker stopped working a couple of days ago. It seemed to not be getting an water. The water dispenser works fine. I purchased a repacement and have the same problem. No water getting to the tray. The replacement came with...

Icemaker water leak [ 2 Answers ]

I have a Maytag Admiral refrigerater with ice maker. The problem is when the ice maker calls for water, at the place where the water enters the ice maker there is a leak. This seems to be coming from just behind what looks like a little suction cup with the small water supply line connects to. Can...

Water hammer since installing icemaker line... [ 7 Answers ]

I connected the icemaker to the cold water in the sink area of the kitchen. I changed the single output shutoff valve that was on the cold water, and put a dual output. One side to sink, other to icemaker. I now hear a noticeable "clunk" sound when the upstairs toilet stops filling, and a less...

Whirlpool icemaker problem [ 1 Answers ]

I have a freezer-mounted Whirlpool icemaker(Part #4317943). It was new 4 months ago and, for the past 4 months, has been working normally. Now, what seems to be happening is that it fills normally, but the ice is not being pushed out, Any help would be appreciated. Thank you

View more questions Search