Ask Experts Questions for FREE Help !
Ask
    WhiteyCarl's Avatar
    WhiteyCarl Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Dec 11, 2007, 06:10 PM
    How to replace plastic coupling kenmore 80 washing machine
    How to replace plastic coupling from transmission to motor on Kenmore 80 series direct drive washing machine. I' ve located the problem, just don't know how to remove old part.
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Dec 13, 2007, 01:16 PM
    If it is a direct drive I believe you have to pull the tub.
    esquire1's Avatar
    esquire1 Posts: 2,483, Reputation: 209
    Ultra Member
    		  
    #3

    Dec 13, 2007, 02:36 PM
    Remove the motor. Should just be clips to remove. Then you can remove the coupling and replace
    WhiteyCarl's Avatar
    WhiteyCarl Posts: 2, Reputation: 1
    New Member
    		  
    #4

    Dec 13, 2007, 09:55 PM
    Quote Originally Posted by esquire1
    Remove the motor. Should just be clips to remove. Then you can remove the coupling and replace
    Correct and easy... Removed clips and replaced... Thanks a million!:D
    feduptenant's Avatar
    feduptenant Posts: 2, Reputation: 1
    New Member
    		  
    #5

    Jun 9, 2009, 09:37 AM

    For someone not so knowledgeable... how would one remove the motor? The appliance guy said our 80 series was not worth fixing because it needed this repair. I don't see how a $20 part is "not worth fixing."
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore washing machine [ 1 Answers ]

I have a kenmore three speed washing machine but cannot figure out how to get the top off Can anyone help me with this problem Thank you grumpypapa:( :confused:

Kenmore Washing Machine [ 2 Answers ]

My Kenmore model # 110. 91551210 wahing machine, will not agitate or spin, in none of the cycles, it will fill with water and drain, I also can hear the moter running but it will not agitate or spin, what is the problem?:confused:

Kenmore washing machine [ 1 Answers ]

My washing machine will not spin out the wash cycle or the rinse cycle. When I hold the lid latch down and turn the tub with my hand and it will start spinning fine. I can see it try to start spinng but it cant

View more questions Search