Ask Experts Questions for FREE Help !
Ask
    prescott's Avatar
    prescott Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 9, 2006, 06:15 PM
    Kenmore washing machine
    My washing machine will not spin out the wash cycle or the rinse cycle.
    When I hold the lid latch down and turn the tub with my hand and it will start spinning fine. I can see it try to start spinng but it cant
    esquire1's Avatar
    esquire1 Posts: 2,483, Reputation: 209
    Ultra Member
    		  
    #2

    Nov 9, 2006, 06:23 PM
    Most likely the pin on the lid.Check to make sure it is pushing in on switch
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore 70 series washing machine [ 12 Answers ]

I have a kenmore 70 series washing machine, the machine will not agitate, or when it does it moves very little, the spin cycle does not work. The timer seems to be working, because it moves and goes through its process and stop. Does anyone have any ideas which would help me with the problem. Like...

Kenmore Washing Machine won't spin [ 4 Answers ]

Hello - I have a Kenmore 70 series Washing Machine that stopped spinning today. I can hear the motor whirring and all the other features still work - just no spin. I have tried the spin cycle on all the diff "levels" (delicate etc) and still no spin. Got a load of wet clothes in there though :p...

Kenmore Washing Machine Overflow Question [ 2 Answers ]

Hi, I just found this forum, and I'm really glad I did. I hope someone here can help me figure out this problem. I have a 3 year old Kenmore 2-Speed washer and it washes clothes just fine. The only problem is that it overflows when the water is draining. When this first began to happen, I...

Kenmore washing machine spin cycle [ 2 Answers ]

My Kenmore washer will go through the wash cylce but when it reaches the spin cycle the water will drain out but will not spin out. I did replace the motor isolation cupling, but that did not take care of the problem. I'm thinking that the control magnet could be the culprit. Any thoughts?? LAJ

Kenmore Elite Washing Machine overflow [ 0 Answers ]

My washing machine is leaking water from below before it gets to the drain cycle. Is this a water level switch problem and if so where can I find it? I don't believe there were any error codes.

View more questions Search