 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
YOU need a common screwdriver or a heavy made butter knife. At the bottom edge of the top push easley in with what you are using, it will start to raise up (the top) . Raise it up till it comes loose , about 1/2 to3/4 ". There are catches on each corner . When you put it back on watch and align the top with the catches on the main part of the washer. IF I have ansewered your question and helped rate my answer below . Thanks F.B.E.
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I have a kenmore 70 series washing machine, the machine will not agitate, or when it does it moves very little, the spin cycle does not work. The timer seems to be working, because it moves and goes through its process and stop. Does anyone have any ideas which would help me with the problem. Like...
Washing machine is 15 years old. Problem is: water doesn't fill up tank. Keeps Running outside in the yard. Wife jiggles the knob. Then its okay. Doesn't do it all the time. What is there some kind a trap somewhere in the bottom of the machine that stays open allowing the water to drain out...
My Kenmore model # 110. 91551210 wahing machine, will not agitate or spin, in none of the cycles, it will fill with water and drain, I also can hear the moter running but it will not agitate or spin, what is the problem?:confused:
My washing machine will not spin out the wash cycle or the rinse cycle. When I hold the lid latch down and turn the tub with my hand and it will start spinning fine. I can see it try to start spinng but it cant
View more questions Search
|
