Ask Experts Questions for FREE Help !
Ask
    Goteeman's Avatar
    Goteeman Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 18, 2007, 08:23 AM
    Dyson DC07 Has very poor suction when trying to vacuum carpet - $400 P.O.J.
    :mad: When I am vacuuming the carpet I can feel debris hitting my feet, that vacuum is not picking up well at all. I have checked for obstructions and there are none, I can feel the end of the hose in the head and there is suction there but it doesn't pickup well across the floor bar. What's the deal? Any thoughts?:mad:
    Tech610's Avatar
    Tech610 Posts: 7, Reputation: 1
    New Member
    		  
    #2

    Dec 5, 2008, 07:43 AM
    You need a new internal hose which is located on the bottom of your unit. You can replace it yourself. It is roughly 6 inches long and connects to the foot for suction and pushes the head to the floor. All you do is pull on side with a rubber coupler of the unit and twist the hose off the foot assy.
    kakkypants's Avatar
    kakkypants Posts: 1, Reputation: 1
    New Member
    		  
    #3

    Sep 6, 2010, 01:29 PM
    I know your note was from 2007 or so, but I am just now seeing it. I have a Dyson DC07 with the same problem. Did yours get solved?

    Kathy
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Loss of suction from main use in Dyson DC07 but tools usage fine? [ 1 Answers ]

I am having problems with my dyson dc07 hepa filter. When using the floor part of the hoover, there seems to be less suction power then there was. But when I use the tools the suction is a lot better. Any advise? I have cleaned filters and checked for blockages and doesn't seem to be any leaks...

Dyson DC07 [ 1 Answers ]

My dyson assembly bin doesn't work. I press the release button and it's completely stuck. It's full right now so I don't want to use it anymore. Any suggestions my carpet is in dire need of a vacuum.

Dyson DC07 [ 1 Answers ]

Having a problem with getting it click into it's upright position, this has only just happened and it's been fine for the last 5 years. Since this happened the direction of suction is only through the wand (I would call it the handle but that's what it's called in the manual). I can't see...

Dyson DC07 [ 1 Answers ]

Hi, my dyson dc07 won't pick up properly, it seems the air doesn't circulate in the cylinder anymore and when you take the cylinder off to empty what little it did manage to lift the bottom of the cylinder is very hot. Can anyone tell me what I need to do to fix this problem.

View more questions Search