Ask Experts Questions for FREE Help !
Ask
    sky1075's Avatar
    sky1075 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Oct 19, 2007, 05:45 PM
    Light & remote not working
    I installed a Harbor Breeze ceiling fan w/remote. It worked fine for 6 months, until I recently tried to turn o the light with the remote and it would not turn on or chage speeds on the fan. So I thought the batteries were bad & replaced them, but that was not the problem. I can still chage speeds on the fan with the chain, but I can't get the light to work at all.
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #2

    Oct 20, 2007, 11:23 AM
    Since the fan has pullchains, remove the receiver and wire the fan without it and see how everything works.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Harbor Breze Fan w/remote & light fixture [ 1 Answers ]

I just got the fan second hand and the remote does not turn the light completely off. The fan part works great. I did purchase another remote. Hope this will work. I also need a bulb that goes into that light and my Lowe's store could not cross it for me. Do you have instructions on how to...

Hunter Remote with Hampton Bay fan & light [ 4 Answers ]

I have a Hampton Bay, Courtney Model 42-CN ceiling fan with light kit. It works fine. I am adding a remote control kit, Hunter Universal Model 27185. The directions for the remote call for a red wire leading to the light, but the wires from the ceiling are black, blue and white. Assuming blue...

Harbor Breeze Ceiling Light & Fan Remote [ 1 Answers ]

I saw someone say they by-passed the remote. How would I do this. I know nothing about this thing except it is not working. How do you change "dip" settings? Obviously, I need help, but right now I just want to have some air. Thanks:p

Installing Thermostat Ceiling Fan & Light Remote Control [ 1 Answers ]

I am installing a HarborBreeze Thermostate Ceiling Fan & Light Remote Control on a standard ceiling fan (no I can't find the brand or model name) with a pull chain for the light and a pull chain for the speeds. There are 3 speeds on the fan. My problem is that there are only five wires on the...

Fan & light suddenly quit working [ 1 Answers ]

Replaced battery in remote and check switch, both okay. What should I check next?

View more questions Search