Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Harbor Breeze Ceiling fan w/remote, help!
[ 4 Answers ]
I just puchased a Harbor Breeze ceiling fan w/ 2 lights(1 up) and remote control. I have 4 wires(black,white.red and bare) out of ceiling box. Remote has black and white on one side and black,white,blue,and orange on other which match those coming from fan. Do I need red from box to operate other...
Harbor Breeze Ceiling Fan Remote & Transmitter
[ 18 Answers ]
Hi- I installed my fans no issues, and then decided that I wanted a remote (especially for the light) so I got a supplemental remote by Harbor Breeze. I installed it fine and it seemed to work; however, there was quickly an issue: When the fan was set to high I could not dim the light (up...
Harbor Breeze Ceiling Fan - Disconnect Remote?
[ 1 Answers ]
My home is wired for a 3-way switch for the ceiling fan light, and a 2-way switch for the fan motor. I purchased a Harbor Breeze model Exetor fan with remote. I'd prefer not to use the remote. Can it be installed to operate from the wall switches only without the remote? Thank you
HARBOR BREEZE CEILING FANS: Fan & Remote Control Frequency Settings
[ 1 Answers ]
We recently remodeled our home and had 3 Harbor Breeze ceiling fans installed. Being that we did not install the fans ourselves, we do not have the instruction manual. All of our fans are set to the same transmitter frequencies, so that when you turn one fan or light on, all of them go on. I...
Harbor Breeze fan/light with remote
[ 1 Answers ]
I have recently installed a Harbor Breeze fan/light with remote. It is operated by a 3way switch. Each time the switch is turned on, the fan and/or light has to be "manually" turned on with the remote, even though the light was "on" when the switch was turned off. Appears to be no memory in the ... View more questions Search
|