Ask Experts Questions for FREE Help !
Ask
    flossymeg's Avatar
    flossymeg Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Oct 14, 2007, 08:32 AM
    Honeywell Chronotherm IV Plus Thermostat
    Although I am setting the System to 'Off' the thermostat is not switching off and there is still cold air blowing through the ducts. Help please?
    acetc's Avatar
    acetc Posts: 1,004, Reputation: 79
    Ultra Member
    		  
    #2

    Oct 14, 2007, 10:35 AM
    Is the fan switch set to auto and not on ?
    flossymeg's Avatar
    flossymeg Posts: 3, Reputation: 1
    New Member
    		  
    #3

    Oct 14, 2007, 10:40 AM
    Quote Originally Posted by acetc
    is the fan switch set to auto and not on ?

    Thank you for your concern but I have now solved the problem by flicking the furnace circuit breaker off, then back on.
    charlied17's Avatar
    charlied17 Posts: 1, Reputation: 1
    New Member
    		  
    #4

    Aug 18, 2013, 01:27 PM
    What zones do I need to connect my wirew to the thermostat. The wires are white, yellow, green, blue, and red. Drawing would be helpful.
    Thiis is a honeywell chronotherm IV Plus
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Honeywell Chronotherm IV Plus Thermostat [ 8 Answers ]

How do I clear the flashing filter light on my thermostat? I have changed my filter.

Honeywell Chronotherm IV Plus thermostat [ 2 Answers ]

I just changed the filter in my air conditioner, how do I reset my thermostat to make the word "filter" stop blinking. I have looked up the owner's manual on-line but it does not address this problem. I have a Honeywell Chronotherm IV Plus programmable thermostat. Thanks for any help that you can...

Honeywell Chronotherm IV Plus Thermostat - Switch Fan to On [ 1 Answers ]

I have two zones on which there is a Honeywell Chronotherm IV Plus Thermostat. Right now I have a/c running on both units with no problem - fan is on "auto". However, my plumber needed me to turn the fan on both units from "auto" to "on". Seemed easy enough to change the setting, but it only...

Honeywell Chronotherm IV plus? [ 1 Answers ]

How do I reset the filter reset button for Honeywell Chronotherm IV plus?

Honeywell Chronotherm IV Plus Honeywell Thermostat, T8624D [ 1 Answers ]

Honeywell Deluxe Programmable Multistage Thermostat, #T8624D Chronotherm IV Plus I have 2 of above thermostats and have had for about 5 years. It takes no batteries and is directly connected to a 24 volt source. Have one upstairs and one downstairs. Have noticed at times that the LCD on...

View more questions Search