Ask Experts Questions for FREE Help !
Ask
    Bob Olson's Avatar
    Bob Olson Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 27, 2007, 11:27 AM
    Honeywell Chronotherm IV Plus thermostat
    I just changed the filter in my air conditioner, how do I reset my thermostat to make the word "filter" stop blinking. I have looked up the owner's manual on-line but it does not address this problem. I have a Honeywell Chronotherm IV Plus programmable thermostat. Thanks for any help that you can give me. Bob
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Sep 27, 2007, 10:32 PM
    The owners manual does state how to reset. I suggest you read again or go here and get the correct manual to read.

    Default - Honeywell Environmental And Combustion Controls

    Type in correct model in box lower right.
    corydec's Avatar
    corydec Posts: 17, Reputation: 2
    New Member
    		  
    #3

    Sep 28, 2007, 11:28 AM
    Is there a filter button on the thermostat. If so most thermostats all you have to do is press and hold it till it clears
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Honeywell Chronotherm IV Plus Thermostat [ 8 Answers ]

How do I clear the flashing filter light on my thermostat? I have changed my filter.

Honeywell Chronotherm IV Plus Thermostat - Switch Fan to On [ 1 Answers ]

I have two zones on which there is a Honeywell Chronotherm IV Plus Thermostat. Right now I have a/c running on both units with no problem - fan is on "auto". However, my plumber needed me to turn the fan on both units from "auto" to "on". Seemed easy enough to change the setting, but it only...

Honeywell Chronotherm IV plus? [ 1 Answers ]

How do I reset the filter reset button for Honeywell Chronotherm IV plus?

Honeywell Chronotherm IV Plus Honeywell Thermostat, T8624D [ 1 Answers ]

Honeywell Deluxe Programmable Multistage Thermostat, #T8624D Chronotherm IV Plus I have 2 of above thermostats and have had for about 5 years. It takes no batteries and is directly connected to a 24 volt source. Have one upstairs and one downstairs. Have noticed at times that the LCD on...

Wiring a Honeywell Chronotherm IV [ 3 Answers ]

What size wiring do you use for a thermostat? I need to move one from an exterior wall to an interior one. Also, any tips on fishing wires through insulation? Bringing it up the wall and over suspended ceiling and down another wall.

View more questions Search