Ask Experts Questions for FREE Help !
Ask
    bubba101's Avatar
    bubba101 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 25, 2007, 12:51 PM
    Kenmore Heavy Duty Washer-Won't Drain
    Hi,

    My washer will NOT drain automatically. I have been told that the pump is possibly bad or blocked. It does not pump the water out, but when the hose is put down to the ground, it does drain. The pump is in the front of the washer, and it was a rubic's cube to get the back off. How do I get the pump apart, and check to see if a sock is twisted up in there?
    The machine agitates, and fills with no problem. Thank you for your knowledge.
    esquire1's Avatar
    esquire1 Posts: 2,483, Reputation: 209
    Ultra Member
    		  
    #2

    Sep 25, 2007, 12:56 PM
    Teh pump should be held to the drive motor by 2 spring clips. Remove the clips and pull the pump off the motor shaft
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore Heavy Duty Dryer [ 1 Answers ]

My dryer went out and neighbor gave my a older model Kenmore Heavy Duty dryer and said it worked.When I plugged it up it worked fine but it concerns me because if you look behind it while its on and running there is a red glow.If its off its not there.Ive never seen a dryer do this before is it...

Kenmore Heavy Duty Washer now agitating [ 3 Answers ]

Our Kenmore Washing doesn't seem to be agitating correctly. The base will turn but the agitator doesn't. I pulled it off and put it back on. Just to make sure it was seated correctly. Any thoughts. Thanks Chris

Kenmore Heavy Duty washer woes [ 5 Answers ]

I have a Kenmore Heavy Duty washer, model C110 4870880. It has started to leak what looks like oil from underneath. There are no corresponding sounds or smells, but for a little while now, the knob sticks at the second rinse point. If I move ithe knob slightly, the machine moves into that cycle,...

Kenmore Heavy Duty Dryer [ 3 Answers ]

The Heating Element is working, the belt is fine and there is power to my dryer but when you push the start button it does not start. Please help... Thanks.

Kenmore Heavy Duty washer water leakage? [ 2 Answers ]

It would be wonderful if anyone can help. I have and old Kenmore heavy duty Washer, Model#c1104430081 canadian model. Problem starts as washer becomes full of water, leakage seems to occur between washer basin(if that's The correct term?) and adjacent metal connector. Leakage increases on...

View more questions Search