Ask Experts Questions for FREE Help !
Ask
    ac101's Avatar
    ac101 Posts: 463, Reputation: 57
    Full Member
    		  
    #1

    Sep 13, 2007, 04:53 PM
    Garden tub
    See new post drop in garden tub
    ac101's Avatar
    ac101 Posts: 463, Reputation: 57
    Full Member
    		  
    #2

    Sep 14, 2007, 03:22 PM
    OKAY, got the cabinet design figured now just leaves me with the question what type of wood to use the tub will not see a lot of use. I had thought of using oak planks for the decking how well would oak stand up to moisture. I know ceramic tile would be better but I am a sucker for wood work.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Bath tub [ 1 Answers ]

When taking a shower, the water comes from the shower head and the faucet in the tub. Then the tub drains really slow. How can we fix this problem, we wait about 15-25 minutes before the person can shower.

Bath tub [ 1 Answers ]

How do I resurface my porcelain bath tub?

Recent Drop in Shower/Tub water Pressure [ 3 Answers ]

Yesterday morning my Wife took a shower with fine water pressure (it is low to begin with and I don't have one of the water saving washers installed) but today when I turned on the show the stream was very weak and slowly got weaker until it is now just dripping out of the head. The bath tub is...

Finishing Basement with 1/2 bath [ 3 Answers ]

HI MIKE, I APOLOGIZE FOR THE DELAY BUT I NEEDED TIME TO STUDY AND RESEARCH YOUR PREPOSAL. I'M GOING TO USE A LITTLE DIFFERENT FORMAT IN ANSWERING. I'LL EDIT YOUR POST AND ANSWER IN CAPS. I was getting ready to finish my basement and plan to install a 1/2 bath myself (toilet and lavatory). My...

Finishing Bath in Basement [ 4 Answers ]

Hi - My builder roughed in a bath in the basement of our recently constructed home (2 yrs. Old). I've almost finished the basement, and need to complete the bath. I'm no plumber, but I'm pretty handy and have glued my share of PVC in the past. I'm hoping you can help me through the process! ...

View more questions Search