Ask Experts Questions for FREE Help !
Ask
    glamag0271's Avatar
    glamag0271 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    May 2, 2007, 02:02 PM
    Bath tub
    How do I resurface my porcelain bath tub?
    NorCal68's Avatar
    NorCal68 Posts: 79, Reputation: 6
    Junior Member
    		  
    #2

    May 7, 2007, 03:13 PM
    This isn't really a do-it-yourself project.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Bath tub valve [ 3 Answers ]

I have a "Symms" valve on my tub. The problem is that not enough cold water comes through. IF I adjust the valve for a cooler shower I end up with very low flow. I have 115 F water temp as hot water supply. Before I changed the valve I had good cold water flow now it seems I can only get hot...

ELJER bath tub [ 1 Answers ]

My ELJER bath tub faucet keeps leaking. How to fix it?

Bath tub drain [ 1 Answers ]

How do I replace the bath tub drain, it says it just screws out. What type of tools will I need.

Bath tub surround [ 2 Answers ]

I replaced the green board around my bath tub. Do I have to paint it before I install the tub surround

Hole in bath tub [ 1 Answers ]

I Have a small hole in the bottom of the bath tub just above the water drain is there some kind of putty I could use to repair this

View more questions Search