Ask Experts Questions for FREE Help !
Ask
    paulaj45's Avatar
    paulaj45 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 11, 2007, 03:49 PM
    Kenmore electric dryer
    My dryer will not come on I replaced the push start switch. And dryer is still not coming on
    esquire1's Avatar
    esquire1 Posts: 2,483, Reputation: 209
    Ultra Member
    		  
    #2

    Aug 11, 2007, 03:58 PM
    Do you a voltage at the plug? The beaker has not tripped?Check the thermal fuse on the back of the vent housing. Unplug unit from wall, disconnect 1 wire from the fuse and chack for continuity. If none you will need to replace. You can also jumper it out to test.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore Electric dryer [ 1 Answers ]

My dryer is a kenmore HE4 about 3 years old. Everything looks fine, except it does not heat up. Checked the exhaust vent and is fine, cheked the heating elements and it looks fine, once I put everything back together the dryer started heating up for awhile, then it went back to cold air. Is there...

Kenmore electric dryer series 70 [ 1 Answers ]

I cannot find the fuses it drescribes to look for on the dryer in case of no heat! Can someone help me?

Kenmore Elite Electric Dryer [ 1 Answers ]

I have a Kenmore Elite Electric dryer, model 110.64992300 that will not heat. I suspect the heater relay is bad, but I can't open up the top console to get to the electronics. Do you know how to open it or have directions showing how? I don't want to break anything.

Kenmore electric dryer not spinning [ 1 Answers ]

The motor on my dryer turns on but it does not spin. Do you know what might be wrong with it?

View more questions Search