Ask Experts Questions for FREE Help !
Ask
    carrascoe01's Avatar
    carrascoe01 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jun 17, 2007, 06:12 AM
    Kenmore electric dryer series 70
    I cannot find the fuses it drescribes to look for on the dryer in case of no heat! Can someone help me?
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #2

    Jun 17, 2007, 07:22 AM
    Follow element and back, will be mounted on metal duct enclosing element, may be 2 or 3.
    Just follow voltage and see where lost. Or, with power off, remove 1 wire and do continuity
    Test, Should be continuity, the one that is open, is the defective one.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore 600 series dryer - electric [ 4 Answers ]

Hi There folks I have abrand new Kenmore 600, electric dryer. I have a problem with the dryer. The first I used it, it was fine.Then after a few days when I tried to push the switch it turns on but when I remove my finger from the switch, it turns off.

Kenmore 80 Series Dryer [ 3 Answers ]

HELP PLEASE!! OK I don't want to pay $200+ for a fix that's under $80. My kenmore 80 series electric dryer will only start in the wrinkle guard mode (no heat), anything setting with heat and it won't start. I checked the internal safety fuse and it passes a current. So could it be the heating...

Heating element Kenmore 70 series electric dryer [ 6 Answers ]

When I start the dryer the heating element gets hot for about 5 seconds then blows a fuse. The dryer will still cycle, but never get hot again. I replaced the fuses and no luck. When I took the plate off I can see that it is getting hot. There are 5 coils and it appears that the top 3 coils are...

Kenmore Dryer 90 series [ 2 Answers ]

Hi all, I have little experience with trouble shooting appliances so my first question is going to be kind of silly to those that have even a little experience. I have a Kenmore 90 series @ 10 years old and it isn't heating. Everything else seems to be working properly. At first I assumed it...

View more questions Search