Ask Experts Questions for FREE Help !
Ask
    martin1581's Avatar
    martin1581 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 7, 2007, 03:37 PM
    Kenmore Elite Electric Dryer
    I have a Kenmore Elite Electric dryer, model 110.64992300 that will not heat. I suspect the heater relay is bad, but I can't open up the top console to get to the electronics. Do you know how to open it or have directions showing how? I don't want to break anything.
    esquire1's Avatar
    esquire1 Posts: 2,483, Reputation: 209
    Ultra Member
    		  
    #2

    Jun 7, 2007, 04:37 PM
    Go in through the back and check your elementand the thermal limits. Also check lint trap and all tubing to the outside. Bet you'll find your problem with these checks
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore elite dryer [ 2 Answers ]

The dryer does not heat up. I replaced the heating element, it still does not heat up when turned on? Any clues to what it could be?

Heating Element Kenmore Elite Electric Dryer [ 3 Answers ]

How do I remove the heating element from the dryer for replacement? I can get to it and there seems to be one or two screws to loosen, but I can't disconnect the electrical connections to the heating element itself.

Kenmore Elite HE3 Electric Dryer [ 1 Answers ]

My dryer turn off all by itself. An error code of E1 appears. We press start/cancel and start the dryer again. After a few minutes it shuts off again displaying the error code once again. Help... :eek:

View more questions Search