Ask Experts Questions for FREE Help !
Ask
    jillwillhoit's Avatar
    jillwillhoit Posts: 4, Reputation: 1
    New Member
     
    #1

    Aug 6, 2007, 10:38 AM
    Patio light stopped working
    A reply was posted to check the gfi receptacle, where is it at?
    ebaines's Avatar
    ebaines Posts: 12,131, Reputation: 1307
    Expert
     
    #2

    Aug 6, 2007, 11:34 AM
    First - in the future please post follow-up questions to previous posts in the same thread - it's confusing if you start a new conversation by referring to an old post.

    Second - there may not necessarily be a GFI at all - it's just that if there is, and the porch light is wired to the load side of it, that may explain the problem. In new construction you will typically find a GFI outlet outside near both the front and rear doors of the house. If you have a GFI, check to see if it has tripped. If there is a regular outlet out there without a GFI, try plugging something into it to see if it works or not.

    One other suggestion - have you checked the circuit breakers?

    Finally - when was the last time you know the porch light worked? Has there been any electrical work in the interim?
    jillwillhoit's Avatar
    jillwillhoit Posts: 4, Reputation: 1
    New Member
     
    #3

    Aug 6, 2007, 04:50 PM
    Sorry about the thread thing, I'm new to this,
    I will check the circuit breakers, it is new construction...
    The porch light worked 5 days ago.
    I had the air conditioner serviced, the "panel" and motor went out
    I checked what I think the gfi's are (the outside plugs, covered, with 'test and reset' on them)
    ebaines's Avatar
    ebaines Posts: 12,131, Reputation: 1307
    Expert
     
    #4

    Aug 7, 2007, 06:15 AM
    Quote Originally Posted by jillwillhoit
    i checked what i think the gfi's are (the outside plugs, covered, with 'test and reset' on them)
    Yes - that's it - plug something into the GFI outlet, like a lamp or a hair dryer, and see if it works. If it does, press the "test" button and the power should cut out. Then press "reset" and the power should come back on.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Hampton Bay ceiling fan light fixture stopped working but fan still works why? [ 14 Answers ]

New light put in my Hampton Bay ceiling fan, but then after a few days, no light bulbs work but fan runs fine, why is this happening?:confused:

Ceiling light stopped working [ 3 Answers ]

Hello, Last night I turned on the ceiling light in the hallway and it made a popping noise, with a small blue flash at the light, exactly like when a light bulb has just burned out. There are three bulbs in the light fixture and after that none would come on. I changed all three bulbs and the...

Hampton Bay fan/light stopped working [ 3 Answers ]

Yesterday the fan and light stopped working from the remote. The fan works on high speed only at the wall switches (2) and will operate with either wall switch (or both) in the "ON" position. I have changed battery (9v) and also re-toggled the switches in the remote. Unit does not have any pull...

Patio light stopped working [ 2 Answers ]

I have replaced the bulb with several new bulbs but it is still not working? Why?

One Light Stopped Working on a Track of 3 [ 2 Answers ]

We have a track light that has been up for a year with no problems. One bulb burned out (we thought). We got a replacement bulb from the hardware store and changed it, but the bulb still won't work. We checked and the bulb is the correct type. It plugs in fine, fits snug, and everything seems...


View more questions Search