Ask Experts Questions for FREE Help !
Ask
    sweetwilli's Avatar
    sweetwilli Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 24, 2007, 06:36 PM
    Whirlpool Sension GEW9868KQ0 -Thermistor
    Whirlpool E1 error code appears when dryer stops and clothes are not dry. I undersand this is a thermistor problem. Exactly where is it located?
    esquire1's Avatar
    esquire1 Posts: 2,483, Reputation: 209
    Ultra Member
    		  
    #2

    Jul 25, 2007, 04:06 AM
    Located ad back side if dryer. They are round or disc shape. May have 2-4 on unit . When you locate,disconnect a wire from each and check for continuity.If none,replace. Go to Appliance Parts from RepairClinic.com - HomePage as you may be able to see a diagram of the location of these. You should also have a diagram on the inside of your units panel.Prior to working on your unit, UNPLUG form power sourcw. WORK SAFE. Good Luck
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Whirlpool Dryer [ 2 Answers ]

My dryer started smelling like it was burning and would not dry the clothes. I installed a new heating element and the thermal fuses. I turned it on and still it would not get the clothes hot, then Poof, sparks shot out and it kicked the breaker. I turned the breaker back on and it shot sparks out...

Whirlpool range [ 2 Answers ]

I purchased a Whirlpool range (model gw395leptoo) in April of last year. Thanksgiving day the satrt button failed. It was under warranty. A technician replaced the control board and keypad. Everything was fine. In August the keypad would no longer take any key presses. I purchased a new control...

My dryer gew9868kq0 [ 1 Answers ]

Hey what up guy I need help my dryer doesn't dry anything. I checked if the element heated up but it didn't, so I did a continuity test and I get a reading of 010 :confused: , does that mean it's bad or something else is wrong. HELP!!

View more questions Search