Ask Experts Questions for FREE Help !
Ask
    mostafasamir's Avatar
    mostafasamir Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 2, 2007, 04:59 AM
    Ceiling Fan Speed
    How can I increase Ceiling Fan Speed ?
    Can it be done by change the Capacitor size?
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #2

    Jul 3, 2007, 12:00 PM
    It can but it will likely burn up your motor.

    What make of fan do you have, and is something wrong with it, or do you just want it to go faster?

    Ceiling fan capactors - troubleshooting and resources - Ceiling Fans N More
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

One speed ceiling fan [ 1 Answers ]

My hampton Bay Reddington IV ceiling fan (REMOTE CONTROLLED) does not work on the low or medium speed . When pressing the high speed button, the fan goes medium. Help! Puzzled

Ceiling Fan Speed [ 1 Answers ]

My ceiling fan does not seem to be moving at its highest speed. It seems to have sufficient power. There is no grinding or dragging sound. What could stop a three speed fan from engaging its high speed setting?

Hampton Bay Ceiling fan: fan speed pull chain [ 2 Answers ]

The pull chain controlling the fan speed snapped off inside the unit. How much disassembly is required to replace it?

3 speed ceiling fan only has 1 speed [ 3 Answers ]

I have a 3 speed Hunter ceiling that I rarely turn off and all 3 speeds had been working. I recently turned it off and when I turned it back on, only the high speed is working. I assumed the switch was bad and replaced it. I still only have the High speed. Has anyone had this problem before? ...

I need more speed on ceiling fan [ 1 Answers ]

I have a hunter ceiling fan. It usually is on about 8hr during the night since I live in the tropics. I don't use the reverse and I have separate switches for the fan and light. The fan is set on max speed always. I need more breeze from the fan so I slightly bent each blade by about 2 degrees and...

View more questions Search