Ask Experts Questions for FREE Help !
Ask
    kidult's Avatar
    kidult Posts: 1, Reputation: 1
    New Member
    		  
    #1

    May 28, 2007, 03:56 PM
    Ceiling Fan Speed
    My ceiling fan does not seem to be moving at its highest speed. It seems to have sufficient power. There is no grinding or dragging sound. What could stop a three speed fan from engaging its high speed setting?
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    May 28, 2007, 07:17 PM
    You'll need to give us a bit more info. Does it have pull chains and have you tried them lately? Does it have a remote or a dimmer switch?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Hampton Bay Ceiling fan: fan speed pull chain [ 2 Answers ]

The pull chain controlling the fan speed snapped off inside the unit. How much disassembly is required to replace it?

Ceiling fan speed switch [ 2 Answers ]

I have a ceiling fan that is approximately 20 years old. I took out the speed control switch, and thought I remembered where the wires went. The switch has two holes per connection. It has Line, 1 2, 3. Apparently I didn't put the wires back correctly. I only get two speeds - high and low. There...

3 speed ceiling fan only has 1 speed [ 3 Answers ]

I have a 3 speed Hunter ceiling that I rarely turn off and all 3 speeds had been working. I recently turned it off and when I turned it back on, only the high speed is working. I assumed the switch was bad and replaced it. I still only have the High speed. Has anyone had this problem before? ...

5 speed ceiling fan wireing [ 1 Answers ]

I have a old ceiling fan that is controlled from a wall switch. The switch has 5 settings. The transformer in the switch need to be replaced however I can't find one here in Phoenix. Can someone tell where I can get a transformer or tell how this switch and fan is wire so I can replace the fan with...

I need more speed on ceiling fan [ 1 Answers ]

I have a hunter ceiling fan. It usually is on about 8hr during the night since I live in the tropics. I don't use the reverse and I have separate switches for the fan and light. The fan is set on max speed always. I need more breeze from the fan so I slightly bent each blade by about 2 degrees and...

View more questions Search