Ask Experts Questions for FREE Help !
Ask
    emileidavis's Avatar
    emileidavis Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 29, 2007, 01:28 PM
    One speed ceiling fan
    My hampton Bay Reddington IV ceiling fan (REMOTE CONTROLLED) does not work on the low or medium speed . When pressing the high speed button, the fan goes medium. Help!

    Puzzled
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #2

    Jun 30, 2007, 12:03 AM
    Sounds like it needs a new capacitor. You will have to replace the receiver.

    Does it have pullchains?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Ceiling fan speed won't change [ 2 Answers ]

We recently purchased and installed two different Harbor Breeze ceiling fans. They have both developed the same problem - all three speed settings are now high speed. We solved the problem for one fan by installing a wall switch that changes the speed. That seems to work fine - we can now get...

Ceiling Fan Speed [ 1 Answers ]

My ceiling fan does not seem to be moving at its highest speed. It seems to have sufficient power. There is no grinding or dragging sound. What could stop a three speed fan from engaging its high speed setting?

Hampton Bay Ceiling fan: fan speed pull chain [ 2 Answers ]

The pull chain controlling the fan speed snapped off inside the unit. How much disassembly is required to replace it?

3 speed ceiling fan only has 1 speed [ 3 Answers ]

I have a 3 speed Hunter ceiling that I rarely turn off and all 3 speeds had been working. I recently turned it off and when I turned it back on, only the high speed is working. I assumed the switch was bad and replaced it. I still only have the High speed. Has anyone had this problem before? ...

I need more speed on ceiling fan [ 1 Answers ]

I have a hunter ceiling fan. It usually is on about 8hr during the night since I live in the tropics. I don't use the reverse and I have separate switches for the fan and light. The fan is set on max speed always. I need more breeze from the fan so I slightly bent each blade by about 2 degrees and...

View more questions Search