Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Panel rating - Raintite Class CTL #AL-36422
[ 1 Answers ]
Where can I get the rating on an older Raintite Panel. Right now there is a 70-Amp main breaker and I want to upgrade this to 100-amp. The inspector wants something that shows this panel is rated for 100-amp service. Tried a search on the Internet and didn't come up with this panel anywhere. ...
Electrical outlet rating vs. Circuit breaker amperage rating
[ 5 Answers ]
Hello to all, I am new to this forum, please excuse me if this question has been answered. I just bought a Thermal Dynamics Plasma cutter. It has a Nema 50-P plug end on it, which I assume is to be plugged into a Nema 50-R outlet. In looking in my reference book, this is a 3 wire...
Sizing amperage for a subpanel
[ 3 Answers ]
I'd like to run a subpanel off a 100 amp main. The sub needs to be able to handle a hot water heater, an electric dryer, a washer, an oven, and an electric stove. All but the washer require 220. What is the minimum size panel I need? What size wire should I use for the run? (Run is about...
Remote amperage rating for Ellington WC-100
[ 1 Answers ]
I recently bought a ceiling fan and have been told by the ceiling fan company to use a remote made by Emerson called an SW-101 wall unit, that is rated at 1.25 amps. Doing a bit of research, I found an Ellington WC-100 that appears to be exactly like the SW-101. Does anyone know if this unit...
Circuit amperage
[ 2 Answers ]
If I have a 15 amp circuit does that mean I can only run one 15 amp rate device on that circuit? Or can I run any number of 15 amp or even higher amp devices, with wattage being the criterion for not overloading the circuit? View more questions Search
|