How do I removing an old ceiling fan?

nicholas77 Posts: 1, Reputation: 1

New Member

Jun 18, 2007, 07:30 AM

How do I removing an old ceiling fan?

I'm in the process of demolishing my kitchen and I am ready to start pulling the ceiling down... how do I remove my ceiling fan?

ceilingfanrepair Posts: 5,733, Reputation: 109

Uber Member

Jun 18, 2007, 11:24 PM

Send me a picture of it.. . Every fan is different.

Add your answer here.

Check out some similar questions!

REMOVING a Hampton Bay ceiling fan [ 13 Answers ]

I'm a newbie to this site so forgive me if I posted in the wrong area. I'm the process of replacing one Hampton Bay ceiling fan with another. Easy enough job , right? Nope. I got as far as removing everything but the motor and the housing that is holding it. As I recall when putting it up...

Removing a hunter ceiling fan [ 1 Answers ]

We are trying to remove a hunter ceiling fan.we unscrewed every screw and still can't get it down the only thing that is left is the black motor I guess,it spins and the canopy is left also.there is not screws on the canopy.we have tried everything even hanging from it but nothing seems to...

Removing a ceiling fan [ 3 Answers ]

I'm in the middle of removing a ceiling fan, to replace it with a basic light (don't need the fan). Right now there are two wall switches that together control the fan: Switch 1 controls the fan: simple Black and White wire Switch 2: controls the light on the ceiling fan 2 wires in: Black...

Removing a hampton bay ceiling fan [ 3 Answers ]

I have a hampton bay ceiling fan, that I need to move to another room. The problem is I can't remember what we did to put it up, it doesn't have screws on the outside like all other fans. I'm sure it's probably something simple I'm overlooking. Can anyone help me please!

Hanging ceiling fan from vaulted ceiling peak [ 2 Answers ]

Want to install Hampton Bay's Berlini model 729395 on a cathedral ceiling with a single ridge beam. Want to hang fan from the peak and there's not enough room for the canopy to cover the hanger bracket. Is there any extenders for this?