Ask Experts Questions for FREE Help !
Ask
    misty90's Avatar
    misty90 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Apr 26, 2006, 09:53 AM
    Removing a hampton bay ceiling fan
    I have a hampton bay ceiling fan, that I need to move to another room.
    The problem is I can't remember what we did to put it up, it doesn't have screws on the outside like all other fans. I'm sure it's probably something simple I'm overlooking. Can anyone help me please!
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #2

    Apr 26, 2006, 10:08 AM
    There is a small decorative ring that covers the screws. You twist it and it will slide down.

    From then on, it disassembles like a normal fan. Follow these installation instructions in reverse:

    Ceiling fan installation - Ceiling Fans N More
    misty90's Avatar
    misty90 Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Apr 27, 2006, 04:06 AM
    Thanks , I looked but this one does not have a small ring. I will try to take a picture and post that.
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #4

    Apr 27, 2006, 09:50 AM
    Send me a picture [email protected]
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

REMOVING a Hampton Bay ceiling fan [ 13 Answers ]

I'm a newbie to this site so forgive me if I posted in the wrong area. I'm the process of replacing one Hampton Bay ceiling fan with another. Easy enough job , right? Nope. I got as far as removing everything but the motor and the housing that is holding it. As I recall when putting it up...

Hampton bay ceiling fan [ 3 Answers ]

I am replacing the remote on a fan that was in the house I bought 5 yrs ago. I don't know the model number. The old fan has a remote controller located below the fan and has a model no - 'UC7051R mas. Lamp Watt 250 Watt.' The top of the fan has two wires connected to house power. All other wires...

Removing a ceiling fan [ 3 Answers ]

I'm in the middle of removing a ceiling fan, to replace it with a basic light (don't need the fan). Right now there are two wall switches that together control the fan: Switch 1 controls the fan: simple Black and White wire Switch 2: controls the light on the ceiling fan 2 wires in: Black...

Hampton bay ceiling fan - please help [ 3 Answers ]

The light pull on the ceiling will turn off the light. The ceiling fan pull seems to work OK. I'd like to keep the fan on and turn the light off; currently unable to do that ;-( With the light switch on, the light is on, the fan is on; I pull the light pull and it switches off for a milisecond...

Hampton Bay Ceiling Fan [ 1 Answers ]

I have a Hampton Bay “Bali” Ceiling Fan. It has been installed and working for about 2 years. It only works with a remote. It has a top “night” light. A bottom “bright” light and 3 speed fan. The other night when I tried to turn off the bright light I heard a pop. When I took the globe off...

View more questions Search