Ask Experts Questions for FREE Help !
Ask
    dennissuite's Avatar
    dennissuite Posts: 1, Reputation: 1
    New Member
     
    #1

    Jun 11, 2007, 07:50 AM
    Ceiling Fan Installation
    I have a Hampton Bay fan to be installed on a 6' droprod to a slanted ceiling I need a canopy large enough to hold the remote receiver and able to let the 3/4 inch droprod swivel through the hole
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
     
    #2

    Jun 11, 2007, 08:58 AM
    The canopy included with the fan won't work?

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Ceiling Fan Installation [ 4 Answers ]

I have a very steep family room ceiling angle. I proceeded to install the fan and found out that the drop down bar does is not level due to the ceiling angle. Is there a special installation kit (hangar unit) for steeply angled ceilings? Barry

Ceiling fan installation [ 3 Answers ]

? I have a used ceiling fan with lights and have no idea on how to wire it. I have 3 wires comeing out of the ceiling. Black, white and bare copper. The fan/light assembly has 3 wires black, blue and white. The mounting bracket has 1 green wire and the part the post part has a green wire on it...

Ceiling fan installation [ 2 Answers ]

We have a Hampton Bay Finley ceiling fan. We love the fan, but are not sure if it hangs too low from the ceiling. Do you know of a way to mount it flush with the ceiling instead of with the rod? Is there a different mounting kit we could purchase?

Ceiling Fan Installation [ 2 Answers ]

We installed a ceiling fan, however, we encountered a little trouble. There are 3 wires coming from the ceiling - black, white & red. We attached the black to black, white to white & capped the red. The ceiling fan works, but the LIGHT on the ceiling fan doesn't. I assume the red wire is for...

Ceiling fan installation [ 1 Answers ]

Hi, I am in the middle of installing a ceiling fan where there had been a light fixture. I have already upgraded the brace to support the fan/light and am now down to the wiring. Here is the issue that I hope someone can help with. The house is old although there was an addition put on 20 years...


View more questions Search