Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Ceiling fan installation
[ 3 Answers ]
? I have a used ceiling fan with lights and have no idea on how to wire it. I have 3 wires comeing out of the ceiling. Black, white and bare copper. The fan/light assembly has 3 wires black, blue and white. The mounting bracket has 1 green wire and the part the post part has a green wire on it...
Ceiling fan installation
[ 3 Answers ]
We just put up a new ceiling fan but it's very noisy and we can't seem to find the problem... any idea's what we did wrong
Hampton bay ceiling fan installation with remote
[ 2 Answers ]
Hi There, So I successfully installed two ceiling fans that did not have remote controls. My house is prewired for the ceiling fan and it took a lot of re-reading of the instruction manual before I figured out that the extra wire (red) went to the blue fan wire, black to black, white to white,...
Ceiling fan installation
[ 1 Answers ]
I'm trying to install a Hampton Bay Sidewinder Fan. My wall outlet has two switches (one for the fixture where I want to put my fan and one to a different light in the other room). My fan has a light and a wall transmitter. There is a black wire connected to the switch I want to use. That switch...
Ceiling fan installation
[ 1 Answers ]
Hi, I am in the middle of installing a ceiling fan where there had been a light fixture. I have already upgraded the brace to support the fan/light and am now down to the wiring. Here is the issue that I hope someone can help with. The house is old although there was an addition put on 20 years... View more questions Search
|