Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Three phase vs. Single phase
[ 3 Answers ]
What benefits would you have running a three phase service as opposed to running single phase.
3 Phase vs. Single Phase
[ 8 Answers ]
I am struggling with the difference between 3-phase and single phase and the advantages/disadvantages to both. Could someone help me with this, or point me in the right direction. Any help would be greatly appreciated. Thank You.
Welder hook up in garage
[ 1 Answers ]
I bought a used Miller Syncrowave 351 Welder for my garage. I contacted Miller Electrics online Tech service. They sent me this. The electrical service guide for a Syncrowave 351 shows that at 50/60HZ single phase, input voltage at 230 without power factor Correction you Will need a 125...
208v single phase wiring
[ 1 Answers ]
How do I connect a 208v single phase appliance to my home circuit panel? I installed a 30amp breaker which has 2 connections, red and black (hot), then I have white (neutral), and green for ground. The device only as 2 connectors not 3, plus ground? Thanks
120v/208v single phase appliance wiring
[ 2 Answers ]
Recently purchased a coffee machine that has the above reqts. I understand that it has 220 and 110v circuits that need power. I also purchased a generator to power this brewer outside. If I use a NEMA L14-30P plug, to connect into the generator, What is the sequence of wiring for the plug three... View more questions Search
|